GB/T 30410-2013Leather machine—Leather bursing strength tester (English PDF)
制革机械 皮革崩裂强度测试仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30410-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
December 1, 2014
Scope
GB/T 30410-2013 is the English-translated version of 制革机械 皮革崩裂强度测试仪.
GB/T 30410-2013 is the Chinese standard "Leather machine—Leather bursing strength tester". Its scope clause reads: This standard specifies the leather crack strength tester technical parameters and models, technical requirements, test methods, testing rules, labeling, packaging, Transportation and storage.
This standard applies to all types of leather crack test tester (hereinafter referred to as crack meter). Its clauses include technical data and model.
Found what you need?
Document preview — GB/T 30410-2013
National Standard of the People's Republic of China
- ICS
- 59.140.40
- Classification
- Y 94
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Technical Data and Model
- 3.1 Technical Data
- 3.2 Model
- 4.1 Basic requirements
- 4.2 Properties and Structure
1 Scope
This standard specifies the leather crack strength tester technical parameters and models, technical requirements, test methods, testing rules, labeling, packaging,
Transportation and storage.
This standard applies to all types of leather crack test tester (hereinafter referred to as crack meter).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 9969 General Instructions industrial products
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 14253 light industrial machinery - General requirements
QB/T 1524 Tannery machinery Model methodology
QB/T 1588.3 Light Industry Machinery assembly general technical conditions
3 Technical Data and Model
3.1 Technical Data
3.1.1 Maximum load
1000N.
3.1.2 The value of the test force accuracy
0.1N.
3.1.3 displacement measurement accuracy
0.01mm.
3.1.4 Ball diameter
6.25mm ± 0.05mm.
3.1.5 Ball rising speed
12mm/min ± 2mm/min.
3.1.6 the pressure ring inner diameter
25mm ± 0.05mm.
3.2 Model
Crack instrument models were prepared in accordance with the relevant provisions of QB/T 1524's.
4. Technical Requirements
4.1 Basic requirements
4.1.1
Leather crack strength tester shall comply with the provisions of this standard, according to prescribed procedures approved by the drawings and technical documents manufacture.
4.1.2
Leather crack strength tester of machined parts and assemblies shall conform to GB/T 14253, QB/T 1588.3 of the relevant provisions.
4.2 Properties and Structure
4.2.1
Leather crack strength tester operation should be simple, and its structure should facilitate the rapid crack test results.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30410-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30410-2013
$105.00