GB/T 30397-2013Test method for leather shoes-water vapour absorption and permeability (English PDF)
皮鞋整鞋吸湿性、透湿性试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30397-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
December 1, 2014
Scope
GB/T 30397-2013 is the English-translated version of 皮鞋整鞋吸湿性、透湿性试验方法.
GB/T 30397-2013 is the Chinese standard "Test method for leather shoes-water vapour absorption and permeability". Its scope clause reads: This standard specifies the moisture, Test Method for Determination of water vapor permeability of the whole shoe leather shoes.
This standard applies to general wearing full leather shoes help. Full help casual shoes, sneakers, etc. can be implemented by reference. Its clauses include terms and definitions; test equipment and materials.
Found what you need?
Document preview — GB/T 30397-2013
National Standard of the People's Republic of China
- ICS
- 61.060
- Classification
- Y 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Test equipment and materials
1 Scope
This standard specifies the moisture, Test Method for Determination of water vapor permeability of the whole shoe leather shoes.
This standard applies to general wearing full leather shoes help. Full help casual shoes, sneakers, etc. can be implemented by reference.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 22049-2008 Footwear footwear and footwear components environmental regulation and testing standards environment
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Hygroscopic watervapourabsorption
Under certain conditions, within a certain period of time the whole shoe moisture absorption capacity. With vapor quality within the specified time to absorb the entire shoe to represent.
3.2 Moisture permeability
Under certain conditions, water vapor per unit time through the ability of the entire shoe. With water vapor in unit time to indicate the quality of the entire shoe.
Principle 4
Simulation of the water vapor in humid foot shoes are being absorbed by the upper, the insole, the insole to the outsole cavity and other materials discharging process. To be closed
With a certain humidity, water vapor pressure of the shoe cavity produce leads to a certain temperature, by measuring a predetermined period of time after the shoes to absorb moisture increases
Quality of the whole shoe hygroscopic; desiccant to absorb moisture after passing through the upper increased quality through the inner moisture-permeable shoe the whole measuring unit time.
5 Test equipment and materials
5.1 whole shoe moisture vapor permeability tester
5.1.1
the whole shoe moisture vapor permeability tester vapor generated by the devices, pressure regulating device, the main test shoe last, the chamber, the quality measurement devices
To member, works shown in Figure 1.
5.1.2
moisture vapor generating means into the chamber through the inlet pipe shoes, the shoes are not absorbed and not passed back to the steam pipe back through the vapor cavity shoes
Back vapor generating apparatus.
5.1.3
vapor pressure by the shoe cavity pressure sensor, feedback to the pressure regulating device, by adjusting the amount of water vapor transport, the shoe cavity water
Steam and pressure stable at ambient atmosphere (0.12 ± 0.02) kPa.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30397-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30397-2013
$95.00