GB/T 30264.1-2013Software engineering—Automated testing capability—Part 1: Test institute capability maturity model (English PDF)
软件工程 自动化测试能力 第1部分：测试机构能力等级模型
This is a limited preview
Buy now to download the full PDF (31 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30264.1-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
July 15, 2014
Scope
GB/T 30264.1-2013 is the English-translated version of 软件工程 自动化测试能力 第1部分：测试机构能力等级模型.
GB/T 30264.1-2013 defines the model used to measure the automated testing capability of a software testing institute.
Clause 1 states that this part serves the implementation and the evaluation of a test organisation's automated testing capability, and that a test institute improving its own automated testing capability can also use it as an internal reference.
The page states that GB/T 30264 is divided into two parts, this one on the test institute capability maturity model and part 2 on the staff capability maturity model, and that the terms and definitions are those of GB/T 11457, which it cites as a normative reference.
Clause 4 describes the model: it is built from two components, automated testing resources and automated testing process management, each divided into a number of practices, and it grades capability in four levels from low to high.
Those levels are set out in the text: the first, the basic level, has basic management of automated testers and basic design and execution of automated test cases, with tools used during test execution; the second, the enhanced level, has trained testers, a separate automated testing unit and a test team conscious of automated testing, with automated tools used in process management as well as in execution; the third, the complete level, has accumulated knowledge, senior automation testers, automated tools throughout process management and, beyond execution, in part of test design, test analysis and process control; the fourth, the expert level, has a knowledge base and the ability to apply it, a dedicated automation testing team, automated tools in every test procedure and comprehensive assessment and improvement of process automation capability.
Its contents list names clause 5 on automated testing capability, divided into automated test resources and automated test process management, and clause 6 on the four capability levels taken one by one, followed by informative annexes listing the capability levels and the work products.
The standard is administered by the National Information Technology Standardization Technical Committee (SAC/TC28). It was issued on 2013-12-31 and has applied since 2014-07-15.
Found what you need?
Document preview — GB/T 30264.1-2013
National Standard of the People's Republic of China
- ICS
- 35.080
- Classification
- L 77
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 automated test capability level model
- 4.1 Model Structure
- 4.2 Model Content
- 5 4 automated testing capability
- 5.1 Automated Test Resources
- 5.2 automated test process management
- 6 automated test capability Level
- 6.2 rating 2.13
- 6.3 grades three through
- 6.4 rating 4.18
- Appendix A (informative) List of 23 capability level
- Annex B (informative) List of work products
- References
Foreword
GB/T 30264 "automated testing software engineering capacity" is divided into the following sections.
--- Part 1. Test institutional capacity level model;
--- Part 2. Employees capability level model.
This section is Part 1 of GB/T 30264.
This section drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This section GB/T 30264 is defined in the model used to measure the level automated testing agency testing capabilities.
This section applies to testing organizations test automation implementation and evaluation capacity, but also to test the mechanism of its own automated testing capabilities Improvement while implementing automated testing and evaluation of the internal reference can also be use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 11457 IT software engineering terminology
3 Terms and Definitions
Terms and definitions GB/T 11457, as defined in the application of this document.
4 Automated test capability level model
4.1 Model Structure
Automated testing ability of the model structure shown in Figure 1. Automated testing capability model consists of automated testing and automated testing two resource Integral parts, each part is divided into a plurality of practice.
Level automated testing ability of the model from low to high is divided into four.
The first level is the basic level, with basic automated testing capabilities. Having automated testers with basic administration. You can enter The basic line of automated test design and implementation of use cases. Using test execution tools during test execution.
The second stage is to enhance the level, with high automated testing capabilities. Testers participated in the test automation training, with different division Automated testing department, the entire test team has automated testing awareness. Made proactive automated design bureau in the testing process Management unit processes using automation tools and test tools, testing tools used during test execution.
The third level is the perfect stage, with a complete testing capabilities. Have knowledge accumulation. Senior automation testers, all tested Process management automation tools are used, in addition to test execution, the part of test design, test analysis and process control using the testing tools, Basically automated.
The fourth level is the expert level, with professional testing capabilities. There are a wealth of accumulated knowledge and the ability to automate the application knowledge base. There are special Door automation testing team. All test procedures using automated testing tools, a comprehensive assessment and improvement process automation capabilities.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 30264.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11457-2006 — Information technology Software engineering terminology
GB/T 30264.2-2013 — Software engineering—Automated testing capability—Part 2: Personal capability maturity model
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 30264.1-2013
$465.00