GB/T 30262-2013Evaluation methods for exergy efficiency of air-cooled heat exchangers (English PDF)
空冷式热交换器火用效率评价方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30262-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 18, 2013
Implementation date
July 1, 2014
Scope
GB/T 30262-2013 is the English-translated version of 空冷式热交换器火用效率评价方法.
GB/T 30262-2013 is the Chinese standard "Evaluation methods for exergy efficiency of air-cooled heat exchangers". Its scope clause reads: This standard specifies the evaluation an air-cooled heat exchanger (hereinafter referred to as heat) efficiency, test methods and requirements, labeling and so on.
This standard applies to the side of the air forced convection air-cooled heat exchanger. This standard does not apply to both sides of the gas, and the side of the wet condition of the heat exchanger. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30262-2013
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Evaluation
- 5 2 Test methods and requirements
- 6 Callout
- Appendix A (normative) Efficiency Measurement and Calculation
1 Scope
This standard specifies the evaluation an air-cooled heat exchanger (hereinafter referred to as heat) efficiency, test methods and requirements, labeling and so on.
This standard applies to the side of the air forced convection air-cooled heat exchanger.
This standard does not apply to both sides of the gas, and the side of the wet condition of the heat exchanger.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 10870-2001 displacement and centrifugal water (heat pump) performance test methods
GB/T 14296 air coolers and air heaters
NB/T 47007 air-cooled heat exchangers
GB/T 17758-2010 unit air conditioner
GB/T 23130-2008 room air conditioner heat exchanger
GB/T 25129-2010 cooling air cooler
JB/T 7659.4 fluorinated hydrocarbon refrigeration unit with auxiliary equipment - Part 4. finned heat exchanger
JB/T 10379 heat exchanger thermal performance and flow resistance characteristics common measurement method
3 Terms and Definitions
GB/T 14296, NB/T 47007, GB/T 23130-2008 and JB/T 7659.4 defined and the following terms and definitions apply
In this document.
3.1 heat transfer
Heat exchanger in the test conditions specified operating time per unit time to give fluid or the heat released in the heat exchanger.
3.2 flow pressure drop
Heat exchanger in the test conditions specified operating time, one side of the fluid flow through the pressure loss of the heat exchanger.
3.3 Efficiency
Effective heat input and output sides of the fluid ratio.
3.4 dry conditions
Heat transfer process, the moisture content of the air does not change the working conditions.
3.5 wet condition
Heat transfer process, the air moisture content change working conditions.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30262-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30262-2013
$135.00