Valid

GB/T 30156-2013Method of corrosion and wear for the coated accessories of textile products (English PDF)

纺织制品涂层附件腐蚀和磨损的方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30156-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 17, 2013

Implementation date

October 15, 2014

Scope

GB/T 30156-2013 is the English-translated version of 纺织制品涂层附件腐蚀和磨损的方法.

GB/T 30156-2013 is the Chinese standard "Method of corrosion and wear for the coated accessories of textile products". Its scope clause reads: This standard specifies a method prior to the detection of nickel release from coated metal textile products in the annex to corrosion and wear acceleration method.

This standard applies to the determination of nickel release from the surface with a metal coating, varnish or plastic coated zippers, buttons, rivets, chains and decoration Signs and other textile products, metal accessories. Its clauses include reagents.

Found what you need?

Document preview — GB/T 30156-2013

National Standard of the People's Republic of China

ICS
59.080.01
Classification
W 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 4 Reagents
  • 4.2 DL- lactic acid
  • 4.4 montanic acid ester wax -E wax (CAS Number
  • 4.5 octadecanoic acid (stearic acid) (CAS number
  • 4.7 triethanolamine (CAS number
  • 4.8 silica (quartz) (CAS Number
  • 4.9 degreasing solution
  • 4.10 corrosive

1 Scope

This standard specifies a method prior to the detection of nickel release from coated metal textile products in the annex to corrosion and wear acceleration method.

This standard applies to the determination of nickel release from the surface with a metal coating, varnish or plastic coated zippers, buttons, rivets, chains and decoration

Signs and other textile products, metal accessories.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

Laboratory use specifications and test methods GB/T 6682 Analysis

Principle 3

The sample is exposed to a corrosive environment treatment, placed in a drum containing wear medium. Worn by the media mill grinding paste and fine particles

Material dispositions. The sample and the occurrence of rolling friction wear medium. Sample worn for GB/T 30158 were nickel release testing.

4 Reagents

4.1

Unless otherwise stated, all reagents can be in contact with the sample shall not contain nickel, the reagents were of analytical grade, test water should be consistent

GB/T 6682 stipulated three water.

4.2 DL- lactic acid

greater than 85% purity.

4.3

sodium chloride.

4.4 montanic acid ester wax -E wax (CAS Number

73138-45-1).

4.5 octadecanoic acid (stearic acid) (CAS number

57-11-4).

4.6

Liquid paraffin (CAS No.. 8042-47-5). light weight, a density of 0.84g/L ~ 0.86g/L.

4.7 triethanolamine (CAS number

102-71-6).

4.8 silica (quartz) (CAS Number

14808-60-7). particle size <=200µm.

4.9 degreasing solution

0.5% (mass fraction) sodium dodecyl benzene sulfonate (CAS Number. 25155-30-0) in aqueous solution, or a commercially available neutral clear

Use cleaning agent after appropriate dilution.

4.10 corrosive

50gDL- lactic acid (4.2) and 100g of sodium chloride (4.3) was dissolved in 1000mL of water, shake.

4.11

abrasive paste, formulated containing the following components (in mass fraction).

--- 6% to 8% lignite wax ester wax -E (4.4);

--- 3% stearic acid (4.5);

--- 30% to 35% of liquid paraffin (4.6);

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30156-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30156-2013

$125.00