GB/T 30037-2013The assembly of electrical operation sunroof about motor vehicle (English PDF)
汽车电动天窗总成
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30037-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 27, 2013
Implementation date
July 1, 2014
Scope
GB/T 30037-2013 is the English-translated version of 汽车电动天窗总成.
GB/T 30037-2013 is the Chinese standard "The assembly of electrical operation sunroof about motor vehicle". Its scope clause reads: This standard specifies the technical requirements of the automotive electric sunroof assembly, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to nominal voltage of 12V, 24V automotive electric sunroof assembly, hereinafter referred to as "Window." Cars can also refer to a fixed skylight use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30037-2013
National Standard of the People's Republic of China
- ICS
- 43.040.60
- Classification
- T 26
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.2 Chute assembly
- 3.3 Motion mechanism slidersubassembly
- 3.4 Frame assembly
1 Scope
This standard specifies the technical requirements of the automotive electric sunroof assembly, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to nominal voltage of 12V, 24V automotive electric sunroof assembly, hereinafter referred to as "Window." Cars can also refer to a fixed skylight use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 250 textile color fastness test assessing change in color like the gray card
GB/T 6461 on the metal base metals and other inorganic coatings by etching after the test specimens and ratings
Combustion characteristics of automotive interior materials GB 8410
GB 9656 automotive safety glass
GB/T 10125 artificial atmosphere corrosion test salt spray test
Internal projections passenger GB 11552
QC/T 15 Automotive Plastics General test method
QC/T 17 auto parts weathering test general rules
QC/T 484 car paint coating
QC/T 625 automotive and chemical process for coating layer
QC/T 639 automotive rubber seal
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
From the days of the glazing unit, slide assembly composed installed in the vehicle roof. Days glazing unit movable, by vehicle power to open and close
Closed, can be used for sliding and/or angle turn. After opening the day glazing unit can be improved interior lighting and air circulation features an electric device
Assembly. It does not include a convertible roof system.
3.2 Chute assembly
Mainly by the moving mechanism, framework components, motors, controllers, cables, drive tubes, sunroof sunshade assembly and other components.
3.3 Motion mechanism slidersubassembly
Press the controller to complete the instruction skylight in the relevant provisions of the operation of a combination of motor driven mechanism.
3.4 Frame assembly
By the guide groove containing drainage containing drain assembly and other components.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30037-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30037-2013
$255.00