GB/T 29872-2013Generic specification of energy metrology data concentrated collection terminal of industrial enterprise (English PDF)
工业企业能源计量数据集中采集终端通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29872-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
April 15, 2014
Scope
GB/T 29872-2013 is the English-translated version of 工业企业能源计量数据集中采集终端通用技术条件.
GB/T 29872-2013 is the Chinese standard "Generic specification of energy metrology data concentrated collection terminal of industrial enterprise".
Its scope clause reads: This standard specifies the Industrial Energy metering data centralized collection terminals (hereinafter referred to as "dataset collection terminal") technical requirements, Inspection methods and acceptance criteria.
This standard is suitable for installation in industrial enterprises, are connected by an internal network with energy metering instrumentation, metering data to obtain a variety of energy sources, completion A data accumulation, storage, and energy metering data in a common platform for data exchange energy data center centralization of data collection terminal. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29872-2013
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 technical requirements
- 5 Acceptance Method
- 6 Acceptance Rule
1 Scope
This standard specifies the Industrial Energy metering data centralized collection terminals (hereinafter referred to as "dataset collection terminal") technical requirements,
Inspection methods and acceptance criteria.
This standard is suitable for installation in industrial enterprises, are connected by an internal network with energy metering instrumentation, metering data to obtain a variety of energy sources, completion
A data accumulation, storage, and energy metering data in a common platform for data exchange energy data center centralization of data collection terminal.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 17167 energy use per unit of energy measuring instruments and General Manager
GB/T 29873-2013 energy measurement data on the public internet data transfer protocol
3 Terms and Definitions
Terms and definitions GB 17167 and GB/T 29873-2013 defined apply to this document.
4. Technical Requirements
4.1 platform structure
Comply with GB/T 29873-2013 in Chapter 4.
4.2 centralized data collection terminal functional requirements
4.2.1 Setting Function
Centralized data collection terminal setup functions shall include.
a) set up industrial energy metering device basic information, including. a communication device address, device name, device number, rate, unit of measure
Bit serial port parameters;
b) Set data set collected the necessary configuration information terminal, comprising. a device unique ID, IP server and data center energy side
Mouth, dump data interval, data sampling interval, reporting delays, dump start time;
c) View and set the system time;
d) Set the shift start and end times;
e) setting up the encryption public key.
4.2.2 Data acquisition
Serial communication should have real-time energy metering device for remote data or accumulated data collection capabilities, have at least one free […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29872-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29872-2013
$125.00