GB/T 29818-2013Mass flow meter based on HART protocol general specification (English PDF)
基于HART协议的质量流量计通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29818-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
March 15, 2014
Scope
GB/T 29818-2013 is the English-translated version of 基于HART协议的质量流量计通用技术条件.
GB/T 29818-2013 is the Chinese standard "Mass flow meter based on HART protocol general specification". Its scope clause reads: This standard specifies the terms and definitions based on the HART communication protocol HART Coriolis mass flow meter, classification, to Sum test methods.
This standard applies to Coriolis mass flowmeter based on HART protocol. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29818-2013
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Category
- 5 Requirement
- 5.1 Operating Conditions
- 5.2 HART communication protocol
- 5.3 Electromagnetic Compatibility
- 5.4 10 explosion-proof performance
- 6 Test methods
- 6.1 test environment condition
- 6.2 HART communications protocol test
- 6.3 Compatibility Test Method capacitor
- 6.4 performance test explosion
1 Scope
This standard specifies the terms and definitions based on the HART communication protocol HART Coriolis mass flow meter, classification, to
Sum test methods.
This standard applies to Coriolis mass flowmeter based on HART protocol.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2900.56-2008 Electrotechnical terminology control technology
GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment
GB 3836.2 explosive atmospheres - Part 2. the flameproof "d" protection equipment
GB 3836.3 explosive atmospheres - Part 3. the increased safety "e" protection equipment
GB 3836.4 explosive atmospheres - Part 4. the intrinsically safe "i" protection equipment
GB 3836.9 Electrical apparatus for explosive gas atmospheres - Part 9. the Encapsulation "m" protection equipment
GB 3836.19 Explosive atmospheres - Part 19. Fieldbus intrinsically safe concept (FISCO)
GB/T 17212-1998 industrial process measurement and control - Terms and definitions
GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3 electromagnetic compatibility test and measurement technology RFEMS test
GB/T 17626.4 Electromagnetic compatibility Testing and measurement techniques - Electrical fast transient burst immunity test
GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test
GB/T 17626.6 Electromagnetic compatibility Testing and measurement techniques Immunity to conducted disturbances induced field
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques - Power frequency magnetic field immunity test
Electrical equipment EMC requirements - Part GB/T 18268.1-2010 measurement, control and laboratory use 1. General requirements
GB/T 20728-2006 Measurement of fluid flow in closed conduits of the Coriolis flowmeter selection, installation and user's guide
IEC 61158-5-20.2010 Industrial communication networks - Fieldbus specifications - Part 5-20. Application layer service definition - Type 20
Basis (Industrialcommunication networks-Fieldbusspecifications-Part 5-20. Applicationlayer servicedefinition-Type20elements)
IEC 61158-6-20.2010 Industrial communication networks - Fieldbus specifications - Part 6-20. Application layer service definition - Type 20
Basis (Industrialcommunicationnetworks-Fieldbusspecifications-Part 6-20. Applicationlayerproto- colspecification-Type20elements)
IEC 61784-1.2010 Industrial communication networks profiles - Part 1. Fieldbus profile (Industrialcommunication networks-Profiles-Part 1. Fieldbusprofiles)
3 Terms and Definitions
GB/T 2900.56-2008, GB/T 17212-1998 and GB/T 20728-2006 and the following definition of terms and definitions appropriate […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29818-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29818-2013
$235.00