GB/T 29817-2013General technology requirement for pressure/differential pressure transmitter based on HART communication (English PDF)
基于HART协议的压力/差压变送器通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29817-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
March 15, 2014
Scope
GB/T 29817-2013 is the English-translated version of 基于HART协议的压力/差压变送器通用技术条件.
GB/T 29817-2013 is the Chinese standard "General technology requirement for pressure/differential pressure transmitter based on HART communication".
Its scope clause reads: This standard specifies the HART protocol-based pressure/differential pressure transmitter HART communication related terms and definitions, and abbreviations, classification, Requirements and test methods.
This standard applies to pressure/differential pressure transmitter based on HART protocol.
Found what you need?
Document preview — GB/T 29817-2013
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms, definitions and abbreviations2
- 3.1 Terms and definitions2
- 3.2 Abbreviations4
- 4 Category4
- 5 Requirements4
- 5.1 Working Conditions4
- 5.2 HART Communication Protocol6
- 5.3 Electromagnetic Compatibility12
- 5.4 explosive atmospheres12
- 6 Test methods12
- 6.1 Test conditions12
- 6.2 HART communications protocol test13
- 6.3 Compatibility Test Method capacitor17
- 6.4 explosive atmospheres explosion-proof performance test17
- References18
1 Scope
This standard specifies the HART protocol-based pressure/differential pressure transmitter HART communication related terms and definitions, and abbreviations, classification,
Requirements and test methods.
This standard applies to pressure/differential pressure transmitter based on HART protocol.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment
GB 3836.2 explosive atmospheres - Part 2. the flameproof enclosure "d" protection equipment
GB 3836.4 explosive atmospheres - Part 4. the intrinsically safe "i" protection equipment
GB 3836.19 Explosive atmospheres - Part 19. Fieldbus intrinsically safe concept (FISCO)
GB 3836.20 Explosive atmospheres - Part 20. Equipment protection level (EPL) for the Ga-class equipment
GB/T 17212 industrial process measurement and control - Terms and definitions
GB/T 17614.1 industrial process control systems Transmitters - Part 1. Methods of evaluating performance
GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3 electromagnetic compatibility test and measurement technology RFEMS test
GB/T 17626.4 Electromagnetic compatibility Testing and measurement techniques - Electrical fast transient burst immunity test
GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test
GB/T 17626.6 Electromagnetic compatibility Testing and measurement techniques Immunity to conducted disturbances induced field
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques - Power frequency magnetic field immunity test
Electrical equipment EMC requirements - Part GB/T 18268.1-2010 measurement, control and laboratory use 1. General requirements
GB/T 18271.1 process measurement and control devices - General methods and procedures for evaluating performance - Part 1. General
GB/T 21099.3 process control function blocks (FB) - Part 3. Electronic Device Description Language (EDDL)
GB/T 29910.1 Industrial communication networks - Fieldbus specifications - Type 20. HART specification - Part 1. HART wired
Network physical layer service definition and protocol specification
IEC 61158-5-20.2010 Industrial communication networks - Fieldbus specifications - Part 5-20. Application layer service definition - Type 20
Basis (Industrialcommunication networks-Fieldbusspecifications-Part 5-20. Applicationlayer servicedefinition-Type20elements)
IEC 61158-6-20.2010 Industrial communication networks - Fieldbus specifications - Part 6-20. Application layer service definition - Type 20
Basis (Industrialcommunicationnetworks-Fieldbusspecifications-Part 6-20. Applicationlayerproto- colspecification-Type20elements)
IEC 61784-1.2010 Industrial communication networks profiles - Part 1. Fieldbus profile (Industrialcommunication networks-Profiles-Part 1. Fieldbusprofiles) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29817-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29817-2013
$295.00