GB/T 29760-2013Nacelle cover of composites for wind power (English PDF)
风力发电复合材料机舱罩
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29760-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 18, 2013
Implementation date
June 1, 2014
Scope
GB/T 29760-2013 is the English-translated version of 风力发电复合材料机舱罩.
GB/T 29760-2013 is the Chinese standard "Nacelle cover of composites for wind power".
Its scope clause reads: This standard specifies the wind composite nacelle (hereinafter referred to as the nacelle) terms and definitions, classification, structure and marking, general Requirements, requirements, test methods, inspection rules, marks, transportation, storage, installation, maintenance and repair.
This standard applies to the use of vacuum infusion, hand lay molding process to protect the host and network-based wind power composite machine Canopy. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29760-2013
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Nacelle nacelecover
1 Scope
This standard specifies the wind composite nacelle (hereinafter referred to as the nacelle) terms and definitions, classification, structure and marking, general
Requirements, requirements, test methods, inspection rules, marks, transportation, storage, installation, maintenance and repair.
This standard applies to the use of vacuum infusion, hand lay molding process to protect the host and network-based wind power composite machine
Canopy.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Plastic tensile properties GB/T 1447 fiber reinforced
Plastic bending performance test method GB/T 1449 fiber reinforced
Methods plastic simply supported beam impact toughness test GB/T 1451 fiber reinforced
GB/T 1591 high strength low alloy structural steel
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance
GB/T 2576 non-fiber-reinforced plastic resin content test methods for melting points
Plastic resin content test method GB/T 2577 glass fiber reinforced
Plastic Barcol hardness test GB/T 3854 enhancements
GB 7000.2 Luminaires - Part 2-22. Particular requirements for emergency lighting
GB/T 8237 fiber-reinforced plastic with a liquid unsaturated polyester resin
GB 8624-2006 Classification for burning behavior of building materials and products
GB/T 13912 Metallic coatings Steel parts hot-dip galvanized layer of technical requirements and test methods
GB/T 17470 glass fiber chopped strand mat and continuous strand mat
GB/T 18370 fiberglass roving
GB/T 18684 zinc chromate coating technical conditions
ISO 14567 to prevent falls from a height PPE single point anchoring device (Personalprotectiveequipmentfor protectionagainstfalsfromaheight-Single-pointanchordevices)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Nacelle nacelecover
Composite parts with the vacuum infusion, hand lay-up molding process production, and other accessories in the form of a certain structure assembled for Paul
Support wind power host shell.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29760-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29760-2013
$195.00