GB/T 29654-2013Cold roll formed sheet piling (English PDF)
冷弯钢板桩
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29654-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 6, 2013
Implementation date
May 1, 2014
Scope
GB/T 29654-2013 is the English-translated version of 冷弯钢板桩.
GB/T 29654-2013 is the Chinese standard "Cold roll formed sheet piling". Its scope clause reads: This standard specifies the cold-formed steel sheet pile product classification code, deviation, technical requirements, test methods for ordering the content, size and shape permit, Inspection rules, packaging, marking and quality certificate.
This standard applies to the field of hydraulic engineering, transportation engineering, civil construction and environmental science and technology with a thickness of not less than 2.5mm hot rolled steel sheet coil roll forming unit via continuous roll bending cold-formed steel sheet pile forming. Its clauses include terms and definitions; classification code.
Found what you need?
Document preview — GB/T 29654-2013
National Standard of the People's Republic of China
- ICS
- 77.140.70
- Classification
- H 44
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 classification code
1 Scope
This standard specifies the cold-formed steel sheet pile product classification code, deviation, technical requirements, test methods for ordering the content, size and shape permit,
Inspection rules, packaging, marking and quality certificate.
This standard applies to the field of hydraulic engineering, transportation engineering, civil construction and environmental science and technology with a thickness of not less than
2.5mm hot rolled steel sheet coil roll forming unit via continuous roll bending cold-formed steel sheet pile forming.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
RT Test Method. Test Part 1 GB/T 228.1 metallic materials tensile
GB/T 700 carbon structural steel
GB/T 1591 high strength low alloy structural steel
General provisions GB/T 2101 steel acceptance, packaging, marking and quality certificate
GB/T 2975 Steel and steel products for mechanical testing and sample preparation position
GB/T 4171 weathering steel
GB/T 17505 Steel and steel products General technical delivery requirements
YB/T 081 standard metallurgical products of value determination and the principle of rounding detection values
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Cold-formed steel sheet pile coldrolformedsheetpiling
Cold-formed steel sheet pile is the hot strip as raw materials, roll forming machine Roll Forming processed products, its locking bars on the sides or bend relative
Overlapping or interconnected to form a continuous sheet pile wall structure.
3.2 Curvature curving
Cold-formed steel sheet pile along the longitudinal direction of the vertical and lateral bending of the maximum height.
3.3 Twist twisting
A face of cold-formed steel sheet pile placed in the same horizontal plane, one end is pressed against the horizontal plane along the horizontal plane, measured two
Opposing surface diagonal height.
4 classification code
Cold-formed steel sheet pile in accordance with the cross-sectional shape of products can be divided into a U-shaped cold-formed steel sheet pile, Z-type cold-formed steel sheet pile, cap-type cold-formed steel sheet pile, straight […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29654-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29654-2013
$315.00