GB/T 29599-2013Textile dyeing and finishing auxiliaries - Determination of chemical oxygen demand(COD) (English PDF)
纺织染整助剂 化学需氧量(COD)的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29599-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2013
Implementation date
December 1, 2013
Scope
GB/T 29599-2013 is the English-translated version of 纺织染整助剂 化学需氧量(COD)的测定.
GB/T 29599-2013 is the Chinese standard "Textile dyeing and finishing auxiliaries - Determination of chemical oxygen demand(COD)". Its scope clause reads: This standard specifies the textile dyeing and finishing auxiliaries chemical oxygen demand (COD) determination method.
This standard applies to having no oxidation, reducing textile dyeing and finishing auxiliaries chemical oxygen demand (COD) determination. This standard spectrophotometric method for quick, dichromate law arbitration law. Its clauses include a method (spectrophotometry).
Found what you need?
Document preview — GB/T 29599-2013
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- G 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 a method (spectrophotometry)
- 3.1 Principle
- 3.2 Reagents and materials
1 Scope
This standard specifies the textile dyeing and finishing auxiliaries chemical oxygen demand (COD) determination method.
This standard applies to having no oxidation, reducing textile dyeing and finishing auxiliaries chemical oxygen demand (COD) determination.
This standard spectrophotometric method for quick, dichromate law arbitration law.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
GB/T 8170-2008 revised value represents about rules and limit values and judgment
GB/T 11896 Water quality - Determination of chloride - Silver nitrate titration method
3 a method (spectrophotometry)
3.1 Principle
Sample a known amount of potassium dichromate solution in concentrated sulfuric acid medium with silver sulphate as a catalyst, high temperatures after digestion with a spectrophotometer
Determination of COD value of the method.
When the COD value of the sample at 100mg/L ~ 1000mg/L, measured in nm wavelength (620 ± 10) was produced by the reduction of potassium dichromate
The added value of trivalent chromium (Cr3) absorbance, COD value of the sample and trivalent chromium (Cr3) absorbance proportional to trivalent chromium (Cr3) absorbance value of the sample in terms of COD.
When the sample COD value in 15mg/L ~ 250mg/L, at (440 ± 10) nm wavelength potassium dichromate hexavalent unreduced
The total absorbance of chromium (Cr6) and trivalent chromium reduction generated (Cr3) two chromium ions; in the sample COD value (Cr6) absorbance
Reduction value is proportional, and trivalent chromium (Cr3) is proportional to the absorbance value added, reducing the total value of the absorbance is proportional to the total absorbance
COD value in terms of value of the sample.
3.2 Reagents and materials
Unless otherwise specified, use water only confirm three analytical grade reagents and GB/T 6682-2006 stipulated.
3.2.1
sulfuric acid solution, 19 (volume ratio).
3.2.2 silver sulphate - sulfuric acid solution, 10g/L
Weigh 5.0g silver sulfate, sulfuric acid was added to 500mL standing for 1 to 2 days, stirring the mixture to
Dissolved.
3.2.3 Potassium dichromate standard titration solution (see Appendix A)
3.2.3.1 Potassium dichromate standard titration solution, c (16K2Cr2O7
) = 0.5000mol/L.
3.2.3.2 Potassium dichromate standard titration solution, c (16K2Cr2O7
) = 0.1600mol/L.
3.2.4 pre-mixed reagent
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29599-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29599-2013
$195.00