GB/T 29552-2013Fibre reinforced plastics composites bridge decks (English PDF)
纤维增强复合材料桥板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29552-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2013
Implementation date
March 1, 2014
Scope
GB/T 29552-2013 is the English-translated version of 纤维增强复合材料桥板.
GB/T 29552-2013 is the Chinese standard "Fibre reinforced plastics composites bridge decks".
Its scope clause reads: This standard specifies the fiber reinforced composite deck (hereinafter referred to as FRP deck) terms and definitions, classification and marking, raw materials, Requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to pultrusion molding footbridge, dealers bridge or trestle bridge plate glass fiber reinforced composites, other fiber composites Composite material deck can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29552-2013
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Fiber-reinforced composite bridge decks
- 3.2 The effective width of the deck
- 3.3 Deck height
- 3.4 Calculation span effectivespan
- 3.5 Ultimate bearing capacity of shear pressure
1 Scope
This standard specifies the fiber reinforced composite deck (hereinafter referred to as FRP deck) terms and definitions, classification and marking, raw materials,
Requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to pultrusion molding footbridge, dealers bridge or trestle bridge plate glass fiber reinforced composites, other fiber composites
Composite material deck can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1446 Test methods for fiber reinforced plastic properties General
Plastic tensile properties GB/T 1447 fiber reinforced
Performance test method GB/T 1448 fiber-reinforced plastic compression
Plastic bending performance test method GB/T 1449 fiber reinforced
Methods plastic simply supported beam impact toughness test GB/T 1451 fiber reinforced
GB/T 2576 non-fiber-reinforced plastic resin content test methods for melting points
Plastic resin content test method GB/T 2577 glass fiber reinforced
Plastic Barcol hardness test GB/T 3854 enhancements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Fiber-reinforced composite bridge decks
For bridge deck directly bear the load from fiber and resin composite made of sheet material.
3.2 The effective width of the deck
Perpendicular to the direction of the span, horizontal distance between the outer edge of the deck on both sides of the web. When the surface is not perpendicular to the web and the deck, take the horizontal distance
Min.
3.3 Deck height
The vertical distance between the upper and lower surface of the deck.
3.4 Calculation span effectivespan
The minimum distance between the deck at both ends of the fulcrum when the carriage is supported platform, take the inner edge of the platform distance.
3.5 Ultimate bearing capacity of shear pressure
Deck by the local loads in the vicinity of the support points, the occurrence of shear failure load value or partial pressure at failure.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29552-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29552-2013
$195.00