GB/T 29492-2013Chemicals applied in digital printing materials - The determination of triazines B - Reversed phase high performance liquid chromatography (English PDF)
数字印刷材料用化学品 三嗪B含量的测定 反相高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29492-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 11, 2012
Implementation date
September 1, 2013
Scope
GB/T 29492-2013 is the English-translated version of 数字印刷材料用化学品 三嗪B含量的测定 反相高效液相色谱法.
GB/T 29492-2013 gives a reversed phase high performance liquid chromatography method for measuring the content of 2-(4-methoxy-naphthyl)-4,6-bis(trichloromethyl)-1,3,5-triazine, which the standard refers to throughout as triazine B. Clause 1 states that the method applies to the triazine B used as a chemical in digital printing materials and obtained from the reaction of 1-methoxy-naphthalene with trichloroacetonitrile.
The document is laid out as a test method, with clause 3 giving the principle, clause 4 sampling, clause 5 reagents and clause 6 instruments and equipment.
The principle is to weigh and dissolve the sample, inject the solution onto the column with a micro syringe or a quantitative injection valve, detect it with an ultraviolet-visible detector at the specified wavelength and calculate the triazine B content by area normalization.
Clause 4 requires sampling to follow GB/T 6679 and GB/T 3723, and clause 2 cites GB/T 3723, GB/T 6679 and GB/T 8170.
The reagents listed are HPLC grade methanol, analytical grade chloroform and freshly distilled water, and the equipment listed is a high performance liquid chromatograph with an ultraviolet-visible detector, an analytical balance reading to 0.1 mg, 10 mL and 25 mL flasks and a 2 mL pipette whose smallest graduation is 0.02 mL.
The draft breaks off after the list of instruments in clause 6, and the page carries no table of contents, so the clauses that follow are not shown. It was issued on 7 February 2013 and has applied since 1 September 2013.
Found what you need?
Document preview — GB/T 29492-2013
National Standard of the People's Republic of China
- ICS
- 37.040.20
- Classification
- G 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 4 Sampling
- 5 Reagents
- 6 Instruments and equipment
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association.
1 Scope
This standard specifies the determination by reversed-phase high performance liquid chromatography, 2- (4-methoxy-naphthyl) -4,6-bis (trichloromethyl) -1,3,5-triazine (this standard Quasi-unified referred to as "triazine B") content approach.
This standard applies to the 1-methoxy-naphthalene and trichloroacetonitrile reaction, measured the chemical content of triazine B digital printing materials used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3723 Sampling of chemical products for industrial use General Safety
GB/T 6679 General rules for sampling solid chemical products
GB/T 8170 repair value expressed about the rules and limit values and judgment
3 Method points
Weigh the sample is dissolved, using a micro syringe or quantitative injection valve the sample solution was injected into the column separated, with the specified wavelength ultraviolet Visible detector, calculate the content of triazine B with area normalization method.
4 Sampling
Triazine B sampling implement according to the provisions of GB/T 6679 and GB/T 3723's.
5 Reagents
5.1 Methanol, HPLC grade.
5.2 Chloroform, analytical.
5.3 Fresh distilled water.
6 Instruments and equipment
6.1 UV-Vis detector with high performance liquid chromatography.
6.2 Analytical balance, a sense of the amount of 0.1mg.
6.3 Flask, 10mL, 25mL.
6.4 Pipette, 2mL, the smallest scale 0.02mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29492-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3723-1983 — Sampling of chemical products for industrial use--Safety in sampling--General rules
GB/T 3723-1999 — Sampling of chemical products for industrial use. Safety in sampling
GB/T 6679-1986 — General rules for sampling of solid chemical products
GB/T 29492-2013
$105.00