GB/T 29311-2020Electrical insulating materials and systems--AC voltage endurance evaluation (English PDF)
Also coversGBT29311-2020
Open the GB/T 29311-2020 preview as PDF
This is a limited preview
Buy now to download the full PDF
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
June 2, 2020
Implementation date
December 1, 2020
Scope
GB/T 29311-2020 (Electrical insulating materials and systems--AC voltage endurance evaluation) is available as an English-translated PDF.
GB/T 29311-2020 — This standard describes many factors related to electrical insulation materials and system voltage durability tests, describes voltage durability curves, and lists The test method and its limitations are defined, the terminology of voltage durability is defined, and the sinusoidal intersection of the insulation material and the system is evaluated based on the test results. Guidelines for Durability of Streaming Voltage. This standard is applicable to the durability assessment of insulating materials and systems under AC voltage with a voltage frequency of 20 Hz to 1000 Hz. The test principles used in this standard are also applicable to other waveform voltages.
Document preview — GB/T 29311-2020
National Standard of the People's Republic of China
- ICS
- 29.035.01; 17.220.99
- Classification
- K 15
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, symbols
- 3.1 Terms and definitions
- 3.2 Symbol
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 29311-2012 "General Principles of AC Voltage Durability Evaluation of Electrical Insulation Materials", and GB/T 29311-
Compared with.2012, the main technical changes are as follows.
--- Modify the "Scope" (see Chapter 1, Chapter 1 of the.2012 edition);
--- Modify the "normative references" (see Chapter 2, Chapter 2 of the.2012 edition);
--- Modified the definition of the terms "voltage durability" and "lifetime" (see 3.1.1 and 3.1.2,.2012 editions 3.1.1 and 3.1.2);
--- Removed the term "electrical life" (see 3.1.3 of the.2012 edition);
--- Added the symbol "alpha" (see 3.2);
--- Removed the symbols "ES, ni, tp0, nu'" (see 3.2 in the.2012 edition);
--- Revised "Overview of Test Methods" (see 5.1, 5.1 of the.2012 edition);
--- Modify "Conventional Voltage Durability Test" (see 5.2.1, 5.2.1 of the.2012 edition).
This standard uses the translation method equivalent to adopting IEC 61251.2015 "Electrical Insulation Materials and System AC Voltage Durability Assessment".
The Chinese documents that have a consistent correspondence with the international documents normatively cited in this standard are as follows.
---GB/T 29310-2012 Guidelines for statistical analysis of electrical insulation breakdown data (IEC 62539.2007, IDT)
This standard was proposed by the China Electrical Equipment Industry Association.
This standard is under the jurisdiction of the National Standardization Technical Committee for Electrical Insulation Materials and Insulation System Evaluation (SAC/TC301).
This standard was drafted by. Zhejiang Rongtai Technology Enterprise Co., Ltd., Yantai Minstar Special Paper Co., Ltd., Suzhou Jufeng Electric
Insulation System Co., Ltd., Beijing Electrotechnical and Economic Research Institute of Machinery Industry, Suzhou Taihu Electric New Material Co., Ltd., Sichuan
Dongcai Technology Group Co., Ltd., Suzhou Beide Technology Co., Ltd., CRRC Yongji Motor Co., Ltd., Anhui Weineng Motor Co., Ltd.,
Hongguang Electric Group Co., Ltd., Dongfang Electric Group Dongfang Motor Co., Ltd., Xi'an Jiaotong University, State Grid Anhui Electric Power Co., Ltd.
Force Science Research Institute, Taizhou No. 3 Insulation Material Factory.
Introduction
This standard covers insulating materials and systems. Voltage endurance tests are used to compare and evaluate electrical insulation materials and systems. Sure electrical
The AC voltage durability of edge materials and systems is very complicated, because the voltage durability test results are affected by many factors. This standard is proposed to
A unified method for simple design and analysis of voltage durability tests.
Electrical insulation materials and systems
AC voltage durability assessment
1 Scope
This standard describes many factors related to electrical insulation materials and system voltage durability tests, describes voltage durability curves, and lists
The test method and its limitations are defined, the terminology of voltage durability is defined, and the sinusoidal intersection of the insulation material and the system is evaluated based on the test results.
Guidelines for Durability of Streaming Voltage.
This standard is applicable to the durability assessment of insulating materials and systems under AC voltage with a voltage frequency of 20 Hz to 1000 Hz.
The test principles used in this standard are also applicable to other waveform voltages.
2 Normative references
The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
IEC 62539 Guideline for Statistical Analysis of Electrical Insulation Breakdown Data (Guide for the statistical analysis of electrical insu-
lationbreakdowndata)
3 Terms and definitions, symbols
3.1 Terms and definitions
The following terms and definitions apply to this document.
3.1.1
Voltage endurance; VE
Measurement of the ability of solid insulating materials and systems to withstand voltage.
Note. This standard only considers AC voltage.
3.1.2
Life
Dielectric breakdown time.
3.1.3
Voltage endurance coefficient; VEC
The reciprocal value of the slope of the straight line in the double logarithmic voltage durability graph.
3.1.4
Specimen
Used to evaluate one or more physical characteristics, a representative test object.
3.1.5
Sample
Nominally identical samples randomly selected from the same production batch.
3.2 Symbol
The following symbols apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Normative references
IEC 62539
How to Buy GB/T 29311-2020
- 1Add to cart. Click the "Buy GB/T 29311-2020" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 46830.2-2026 — Plastics - Liquid crystal polymer (LCP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GB/T 28593-2026 — Sand and dust weather warning levels
GB/T 19608.3-2026 — Classification of special environmental conditions - Part 3: Plateau
Secure payment via Stripe
Payments accepted
GB/T 29311-2020
$245.00