GB/T 2930.11-2026Code of practice for seed testing of forage, turfgrass and other herbaceous plants - Part 11: Testing report (English PDF)

6.1 Cover

6.1.1 Number (No.) The numbering system is specified in the quality manual of the testing and inspection unit, and the number should be unique.

6.1.2 Species Name Fill in the Chinese name corresponding to the Latin scientific name of the submitted sample in accordance with GB/T 2930.1.

6.1.3 Inspected Unit The full name of the organization or individual requiring the inspection report should be filled in.

6.1.4 Inspection Category Fill in the form for either supervisory inspection, commissioned inspection, or arbitration inspection based on the customer type.

6.1.5 Name of the testing and inspection unit The full name of the inspection and testing unit should be filled in, matching the official seal.

6.2 Use of Seals and Anti-counterfeiting Marks

6.2.1 Use of the accreditation seal of inspection and testing units Qualified testing and inspection organizations that issue testing and inspection data and results with evidentiary value to the public shall include such data in their testing and inspection reports. It shall be stamped with the official seal for inspection and testing and marked with the qualification accreditation mark.

6.2.2 Original or copy of the seal Inspection reports issued to the inspected unit should be stamped with the "Original" seal, while inspection reports archived by the inspection and testing unit should be stamped with the "Copy" seal.

6.2.3 Official seal of the inspection and testing unit The official seal of the testing and inspection unit should be affixed to the full name of the testing and inspection unit at the bottom of the cover of the test report.

6.2.4 Inspection and Testing Stamp The inspection report should be stamped with the official seal for inspection and testing at the conclusion and across the seam of the report.

6.2.5 Anti-counterfeiting labels Testing and inspection units can set their own anti-counterfeiting labels.

6.3 Basic Information

6.3.1 Species Name (Scientific Name) Fill in the Chinese name and Latin scientific name of the seed according to GB/T 2930.1.

6.3.2 Variety Name Fill out the form based on the variety approval information of the test sample, provided by the customer.

6.3.3 Inspected Unit Same as 6.1.3.

6.3.4 Production Units The full name of the unit that actually produced the seeds being inspected should be filled in.

6.3.5 Production Date

6.3.6 Sampling Location The actual location of the seed batch from which the sample was taken should be filled in.

6.3.7 Sample Number The sampling number is generated by the sampling unit according to the management system or by the sample number generated by the client according to internal management requirements. It should be unique.

6.3.8 Sampling Date

6.3.9 Sampling Base The actual weight of the seed batch taken according to GB/T 2930.1.

6.3.10 Sample Taker Fill in the name of the person who took the sample or the person who submitted the sample.

6.3.11 Sampling Mechanism Fill in the full name of the unit that took the sample.

6.3.12 Qualifications of Sampling Institutions If you have sampling qualifications, fill in the qualification number; if you do not have qualifications, fill in "None".

6.3.13 Sample arrival date

6.3.14 Sample Condition Briefly describe the appearance of the sample, mainly divided into normal and abnormal. Abnormalities include mold, insect infestation, etc.

6.3.15 Sample Number The numbering system is specified in the quality manual of the testing and inspection unit, and the number should be unique.

6.3.16 Inspection Items We can select parameters based on customer requirements, including purity, germination rate, viability, moisture content, weight, other plant seeds, health, seed type and variety, and coated seeds. Inspection items.

6.3.17 Sample Weight The actual weight of the sample, jointly confirmed by the testing unit and the tested unit.

6.3.18 Test Method The test methods shall be performed in accordance with GB/T 2930.2~GB/T 2930.10, GB/T 24869 or the technical standards provided by the customer, and the relevant forms shall be filled out. The standard number of the row.

6.3.19 Classification Basis Quality grading is based on standards such as GB 6141, GB 6142, GB/T 18247.4, GB/T 24869, and GB/T 26615, or standards provided by the customer. If the product quality grading standard is to be followed, fill in the standard number to be followed.

6.3.20 Main Instruments and Equipment Fill in the specific instruments and equipment used in the inspection and testing process and their serial numbers.

6.3.21 Experimental Environment Conditions Determine whether the environmental conditions of the test items are met based on the original experimental environmental condition records. If they are all met, fill in "Meets the test requirements".

6.4 Test Results

6.4.1 Clarity The weight percentages of net seeds, impurities, and other plant seeds in the purity analysis are all rounded to one decimal place. If any group is detected... If the weight percentage is less than or equal to 0.05%, fill in "trace". If no "impurities" or "other plant seeds" are detected, fill in "not detected". "-0.0-". When the weight percentage of a certain type of impurity, a certain other plant seed, compound seed unit, or seed with accessory species reaches or If the percentage exceeds 1.0%, it should be noted in the remarks column of the results report.

6.4.2 Germination Fill in the form according to the test results in accordance with GB/T 2930.4 or the test method standard provided by the customer. Classify and fill in the germination rate and fresh ungerminated seeds. Seeds, abnormal seedlings, and dead seeds. Hard-shelled legume seeds should be included in the germination count; when recording the germination rate, indicate the hard-shelled seed rate. If germination test... If any value is zero during the test, "-0-" should be entered in the corresponding column.

6.4.3 Vitality Fill in the form according to the test results in accordance with GB/T 2930.5 or the test method standard provided by the customer. When filling in the form, legume hard seeds should be counted as viable seeds. Seeds with high strength, and indicate the hardness rate.

6.4.4 Moisture Fill in the results according to the test results in accordance with GB/T 2930.8 or the test method standard provided by the customer.

6.4.5 Weight Fill in the results according to the test results in accordance with GB/T 2930.9 or the test method standard provided by the customer.

6.4.6 Number of other plant seeds Fill in the results according to the test standards of GB/T 2930.3 or the test method provided by the customer. For other plant seed count determinations, the test results should be specified. Methods; In both the full and simplified tests, the number of all other plant seeds found per kilogram of sample weight is used as a table. In finite and reduced finite tests, only the presence or absence of a species is used to indicate its presence. If other plant seeds found cannot be identified... For species, identification can be down to the genus. For other plant seeds listed, both the Chinese and scientific names should be provided.

6.4.7 Other inspection items In addition to the above-mentioned test items, the results of other tests should be recorded in the "Other" column of the test report, with the test item and its name clearly stated before the result. The method. The results are presented as follows:

---The results of health testing are expressed as the percentage of seeds infected by pests and diseases in the test sample, and the scientific name of the detected pathogen is noted;

---The test results for species and variety determination are expressed as the percentage of seeds (seedlings, plants) identifying the species or variety out of the tested seeds (seedlings, plants). The percentage can also be filled in according to customer requirements, representing the proportion of seeds (seedlings, plants) of other identified species or varieties among the tested seeds (seedlings, seedlings, plants). Information such as the percentage of plants;

---The test results for coated seeds should be reported in accordance with the provisions of GB/T 2930.10.

6.5 Quality Judgment It should be in accordance with standards such as GB 6141, GB 6142, GB/T 18247.4, GB/T 24869, GB/T 26615, or the product quality standards provided by the customer. For each grade level, the standard value and measured value are filled in, and individual conclusions and comprehensive judgments are made.

6.6 Test Conclusion

6.6.1 Commissioned Inspection "It is determined to be a first-level seed (or a second-level seed, a third-level seed, or an ungraded seed)." "quarantinable pests". When a qualified sampling unit takes samples for testing, "the submitted sample has been tested" can be expressed as "the batch of seeds has been tested".

6.6.2 Supervision and Inspection Second-grade seeds, third-grade seeds, or ungraded seeds. Quarantine pests.

6.6.3 Arbitration Inspection When the client provides the basis for the judgment, the statement should be. "This batch of seeds (or the submitted sample) has been tested and found to be in compliance with (or non-compliance with) the standards." "quarantinable pests".

6.6.4 Other tests Refer to section

6.6.1 for further details.

6.7 Remarks Including but not limited to.

a) Basic information about the samples provided by the submitting party should be noted in the remarks column of the order form and the test report. "The submitting party's information regarding the samples provided by the submitting party..." "We are responsible for the authenticity of the basic information of the products."

b) When the weight of the submitted sample is too low to retain a sample for retesting, the following should be noted in the remarks column of the order form and the test report. "Submitted sample..." "If the weight is below the specified limit, no sample will be retained for re-inspection."

c) When force majeure delays the issuance of the inspection report, it should be noted in the remarks column of the order form and the inspection report. "Due to force majeure, the issuance of the inspection report is delayed."

d) When the submitted sample is a seed coat or coated seed and moisture content testing is required, this should be noted in the remarks column of the order form and the test report. "Seed coating was not removed during moisture testing";

e) When the submitting party makes other requests that comply with the provisions of this document, the submitting party's requests should be noted in the remarks column of the entrustment form and the inspection report.

6.8 Approval, review, and tabulation The approval, review, and preparation of the inspection report shall be signed or marked with equivalent symbols by the approver, reviewer, and preparer of the inspection report, and the date of issuance shall be noted.