GB/T 29231-2012Opto-electronic-opto transceiver of 650nm 100Mbps ethernet for plastic optical fiber transmission system (English PDF)
塑料光纤系统用650nm百兆以太网光-电-光转发器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29231-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
June 1, 2013
Scope
GB/T 29231-2012 is the English-translated version of 塑料光纤系统用650nm百兆以太网光-电-光转发器.
GB/T 29231-2012 is the Chinese standard "Opto-electronic-opto transceiver of 650nm 100Mbps ethernet for plastic optical fiber transmission system".
Its scope clause reads: This standard specifies the plastic optical fiber systems 650nm Fast Ethernet optical - electrical - optical transponder terms and definitions, components and functions to Sum test methods, reliability testing, inspection rules and signs, packaging, transportation and storage.
This standard applies to plastic optical fiber systems 650nm Fast Ethernet optical - electrical - optical transponder, hereinafter referred to as "650nm light - electricity - light switch Hair. ". Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29231-2012
National Standard of the People's Republic of China
- ICS
- 33.180.01
- Classification
- M 33
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Average transmit optical power meanlaunchedpower
- 3.2 Center wavelength
- 3.3 Receiver sensitivity
- 3.4 Overload optical power overload
1 Scope
This standard specifies the plastic optical fiber systems 650nm Fast Ethernet optical - electrical - optical transponder terms and definitions, components and functions to
Sum test methods, reliability testing, inspection rules and signs, packaging, transportation and storage.
This standard applies to plastic optical fiber systems 650nm Fast Ethernet optical - electrical - optical transponder, hereinafter referred to as "650nm light - electricity - light switch
Hair. "
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 3873-1983 Telecommunication Equipment for packaging technology
SJ/T 11363-2006 electronic information products of toxic and hazardous substances in requirements
SJ/T 11364-2006 Electronic Information Products Pollution Control Marking Requirements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Average transmit optical power meanlaunchedpower
Under conditions of full modulation, optical transmitter at the reference point (S point) average optical power coupled into the fiber optical Ethernet signal.
3.2 Center wavelength
In the emission spectrum, the highest intensity (or width) of 50% at the center wavelength corresponding to two points.
3.3 Receiver sensitivity
At 100Mbit/s Ethernet rate working conditions, 650nm light - electricity - optical transponder frame loss rate of zero, the light receiving side of the reference point (S point) the minimum average received optical power measured.
3.4 Overload optical power overload
At 100Mbit/s Ethernet rate working conditions, 650nm light - electricity - optical transponder frame loss rate of zero, the light receiving side of the reference point (S point) measured maximum average received optical power.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29231-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29231-2012
$195.00