GB/T 29071-2012Non-destructive testing - Test method for industrial computed tomography (CT) examination of initiating explosive device (English PDF)
无损检测 火工装置工业计算机层析成像(CT)检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29071-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
October 1, 2013
Scope
GB/T 29071-2012 is the English-translated version of 无损检测 火工装置工业计算机层析成像(CT)检测方法.
GB/T 29071-2012 is the Chinese standard "Non-destructive testing - Test method for industrial computed tomography (CT) examination of initiating explosive device".
Its scope clause reads: This standard specifies the method for detecting fire workers in industrial computer tomography (CT). This standard applies to the internal charge, structure and defect detection and other pyrotechnic devices. Its clauses include terms and definitions; general requirements.
Found what you need?
Document preview — GB/T 29071-2012
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General requirements
1 Scope
This standard specifies the method for detecting fire workers in industrial computer tomography (CT).
This standard applies to the internal charge, structure and defect detection and other pyrotechnic devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB Z117 industrial X-ray detection Radiological protection standards
GB Z175 gamma ray industrial CT Radiation protection standards
GB/T 12604.11 Terminology for nondestructive testing of industrial computer tomography (CT) to detect
GB/T 20129 NDT electron linear accelerator
GB/T 29034 Non-destructive testing - Industrial computed tomography (CT) Guide
GB/T 29069 Non-destructive testing - Industrial computed tomography (CT) system performance test method
WJ2565 gunpowder, explosives safety regulations
3 Terms and definitions
Terms and definitions GB/T 12604.11 and GB Z175 defined apply to this document.
4 General requirements
4.1 inspectors
Operators engaged in industrial CT system detects pyrotechnic device, the CT and should have the necessary knowledge of computer hardware and software, and after radiation
Shoot security, pyrotechnic devices and the safe operation of the industrial CT NDT professional training, passed the examination to become certified.
4.2 Workplace
Workplace systems for industrial CT detection pyrotechnic means, the general should be set up to meet the testing requirements of radiation protection chamber, control room and
Other auxiliary space, and rational distribution. Host industrial CT systems (including radiation source device, etc.) into the detection chamber control, industrial CT system
Console, computer and other equipment should be placed in the control room.
4.3 detection chamber
Testing room should be kept clean, dry and free of ignition sources, good ventilation and lighting, temperature, humidity should meet the pyrotechnic device safe storage, testing
Technical conditions and controlled in the range of industrial CT system specification requirements. Design and construction of explosion-proof detection chamber should be consistent
WJ2565 requirements, and should meet the GB Z117, GB Z175 radiation protection requirements.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29071-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29071-2012
$155.00