Valid

GB/T 29033-2012Calculation method of water-water heat pump units on the basis of thermodynamic perfectibility (English PDF)

水-水热泵机组热力学完善度的计算方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29033-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

October 1, 2013

Scope

GB/T 29033-2012 is the English-translated version of 水-水热泵机组热力学完善度的计算方法.

GB/T 29033-2012 is the Chinese standard "Calculation method of water-water heat pump units on the basis of thermodynamic perfectibility".

Its scope clause reads: This standard specifies the water - water heat pump thermodynamic calculation method of improving the terms and definitions, calculation parameters, parameter calculation Gets And calculation methods.

This standard applies to the vapor compression cycle of hot and cold water-source heat pump units and water-cooled cold (hot) water unit (hereinafter referred to as "units") of Thermodynamic perfect degree. Its clauses include terms and definitions; calculation parameters.

Found what you need?

Document preview — GB/T 29033-2012

National Standard of the People's Republic of China

ICS
27.200
Classification
J 73

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 calculation parameters

1 Scope

This standard specifies the water - water heat pump thermodynamic calculation method of improving the terms and definitions, calculation parameters, parameter calculation Gets

And calculation methods.

This standard applies to the vapor compression cycle of hot and cold water-source heat pump units and water-cooled cold (hot) water unit (hereinafter referred to as "units") of

Thermodynamic perfect degree.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 10870-2001 displacement and centrifugal water (heat pump) performance test methods

GB 19577-2004 chiller energy efficiency of limited value and energy efficiency rating

JB/T 7249 term refrigeration equipment

3 Terms and Definitions

JB/T 7249 defined by the following terms and definitions apply to this document.

3.1 Thermodynamic sophistication

System efficiency equipment in an operating condition (COP or EER) with this condition of reverse Carnot cycle efficiency ratio.

3.2 Refrigeration thermodynamic conditions sophistication

EER refrigeration equipment running condition and under this condition the reverse Carnot cycle efficiency ratio.

3.3 Heating condition thermodynamics perfect degree

COP heating equipment in operation under the conditions of this condition the reverse Carnot cycle efficiency ratio.

3.4 Lorentz cycle Lorenzcycle

It is composed of two isentropic process and the process of changing the composition of two reversible refrigeration cycle, the result is the consumption of external work shift heat from low temperature cold source

The high temperature heat source.

3.5 Reverse Carnot cycle

It is composed of two isentropic and two isothermal processes consisting of reversible refrigeration cycle, with the result that heat is removed from the consumption of external work chilling source

The high temperature heat source.

4 calculation parameters

Calculation method definitions, symbols and units involved parameters are shown in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29033-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29033-2012

$105.00