GB/T 29031-2012Air-source based air-conditioning (heat pump) water heater unit (English PDF)
空气源单元式空调（热泵）热水机组
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29031-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
October 1, 2013
Scope
GB/T 29031-2012 is the English-translated version of 空气源单元式空调（热泵）热水机组.
GB/T 29031-2012 is the Chinese standard "Air-source based air-conditioning (heat pump) water heater unit".
Its scope clause reads: This standard specifies the source of air-conditioning unit (heat pump) water heaters (hereinafter referred to as "units") terms and definitions, classification and nomenclature, to Requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the motor - compressor drive, using vapor compression refrigeration cycle using air as a heat source, or both at the same time can provide Hot water and indoor air conditioning function (heat pump) water heaters. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29031-2012
National Standard of the People's Republic of China
- ICS
- 27.200
- Classification
- J 73
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and Nomenclature
- 5 Requirement
- 6 Test Method
- 7 inspection rules
- 8 signs, packaging, transportation and storage
- Appendix A (normative) Static heating air-conditioning units hot water heating capacity performance test methods
1 Scope
This standard specifies the source of air-conditioning unit (heat pump) water heaters (hereinafter referred to as "units") terms and definitions, classification and nomenclature, to
Requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the motor - compressor drive, using vapor compression refrigeration cycle using air as a heat source, or both at the same time can provide
Hot water and indoor air conditioning function (heat pump) water heaters.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 4798.1 application of electric and electronic products environmental storage conditions
GB 5296.2 consumer use of household and similar electrical appliances instructions
GB/T 10870-2001 displacement and centrifugal water (heat pump) air conditioner performance test method
GB/T 17758-2010 unit air conditioner
GB/T 18836-2002 duct air-conditioning (heat pump)
GB/T 21362-2008 commercial or industrial use and similar uses heat pump water heater
GB 25130 unit air conditioner security requirements
3 Terms and Definitions
GB/T 17758 and GB/T 21362 and defined by the following terms and definitions apply to this document.
3.1
Air-source air-conditioning unit (heat pump) water heaters (ACWHU) air-sourcebasedair-conditioning (heatpump) water heaterunit
Air as a heat source, with the preparation of domestic hot water heat pump function of the air conditioner unit.
3.2 Cold water-supply capacity (Qcr)
In cooling and hot water preparation test conditions, the cooling capacity of the hot water heating capacity of the unit and the unit. W.
3.3 Cold water-supply power consumption (Wcw)
In cooling and hot water preparation specified test conditions, the total power consumption of the unit, unit. W.
3.4
Cold water-supply coefficient of performance (COPcw) coefficientofperformanceofcombinedcoolingandhot waterheating
In cooling and hot water preparation specified test conditions, cold and hot water-supply capacity of the cold water supply unit associated power consumption ratio, single
Bit. W/W.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29031-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29031-2012
$255.00