GB/T 29017-2012Continuous ink jet printer (English PDF)
连续式喷码机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29017-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
July 1, 2013
Scope
GB/T 29017-2012 is the English-translated version of 连续式喷码机.
GB/T 29017-2012 is the Chinese standard "Continuous ink jet printer". Its scope clause reads: This standard specifies the terms and definitions continuous inkjet printer, model, type, basic parameters and operating conditions, technical requirements, test methods, Inspection rules, marking, packaging, transportation and storage.
This standard applies to continuous inkjet printer (hereinafter referred to as "printer"), printing characters, patterns and other identification mark. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29017-2012
National Standard of the People's Republic of China
- ICS
- 55.200
- Classification
- J 83
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the terms and definitions continuous inkjet printer, model, type, basic parameters and operating conditions, technical requirements, test methods,
Inspection rules, marking, packaging, transportation and storage.
This standard applies to continuous inkjet printer (hereinafter referred to as "printer"), printing characters, patterns and other identification mark.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB 2760 national food safety standards of food additives using standard
GB 2894 Safety Signs and use guidelines
GB 4208 housing protection (IP Code)
GB 4943 Safety of Information Technology Equipment
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 6107 using serial binary data interchange data terminal equipment and data circuit terminating equipment interfaces between
GB/T 7311 classification and packaging machinery Model methodology
GB/T 7932-2003 General technical conditions of pneumatic systems
GB/T 9969 General Instructions industrial products
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test
GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test
GB 19891 Safety of machinery designed hygiene requirements
JB/T 7232 packaging machinery sound power level measurement Simple Method
JB7233 packaging machinery - Safety requirements
HJ567-2010 environmental labeling products technical requirements of inkjet ink
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Dots generated by a continuous non-contact printing device in the surface of the article.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29017-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29017-2012
$165.00