Valid

GB/T 28849-2012SX series experimental box-shape resistance furnace (English PDF)

SX系列实验用箱式电阻炉

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28849-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 5, 2012

Implementation date

February 15, 2013

Scope

GB/T 28849-2012 is the English-translated version of SX系列实验用箱式电阻炉.

GB/T 28849-2012 is the Chinese standard "SX series experimental box-shape resistance furnace".

Its scope clause reads: This standard specifies the SX series of experiments with the terms and definitions, models and key parameters box resistance furnace, requirements, test methods, inspection regulations As well as the logo, packaging, transportation and storage.

This standard applies to the working temperature of the atmosphere and the SX series of natural experiments protective atmosphere 100 °C ~ 1600 °C with a box-type resistance furnace (with Hereinafter referred to as box furnace). Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28849-2012

National Standard of the People's Republic of China

ICS
25.180.10
Classification
N 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 model and the main parameters
  • 4.1 3 varieties and specifications
  • 4.2 Part
  • 4.3 The main parameters
  • 5 Requirements
  • 5.1 General
  • 5.2 Appearance
  • 5.3 heating element manufacturing quality
  • 5.4 Operating temperature
  • 5.5 6 surface temperature
  • 5.6 air furnace heating time
  • 5.7 rating and 7 air furnace loss
  • 7 5.8 Insulation resistance
  • 5.9 compressive strength insulation
  • 6 Test methods
  • 6.1 Visual inspection
  • 6.2 heating element manufacturing QA
  • 6.3 Operating Temperature Test
  • 6.4 Test surface temperature
  • 6.5 air furnace heating time trial
  • 6.6 rating and 11 air furnace loss test
  • 6.7 Insulation resistance test
  • 6.8 Insulation compressive strength test
  • 7 Inspection rules
  • 7.1 Inspection classification
  • 7.2 factory inspection
  • 7.3 Type inspection
  • 8 signs, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transport
  • 8.4 Storage

1 Scope

This standard specifies the SX series of experiments with the terms and definitions, models and key parameters box resistance furnace, requirements, test methods, inspection regulations

As well as the logo, packaging, transportation and storage.

This standard applies to the working temperature of the atmosphere and the SX series of natural experiments protective atmosphere 100 °C ~ 1600 °C with a box-type resistance furnace (with

Hereinafter referred to as box furnace).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 5959.4-2008 Safety of electric devices - Part 4. Particular requirements for resistance heating device

GB/T 10066.1-2004 Test methods for electroheat installations - Part 1. General section

GB/T 10066.4-2004 Test methods for electric equipment - Part 4. Indirect resistance furnaces

GB/T 10067.1-2005 basic technical conditions for electric devices - Part 1. General section

GB/T 10067.4-2005 Electric equipment basic technical conditions - Part 4. Indirect resistance furnaces

JB/T 8195.7-2007 indirect resistance furnace - Part 7. SX series of experiments using a box furnace

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Furnace temperature uniformity

The degree of temperature uniformity box furnace work area in a thermally stable state when the test temperature.

[GB/T 10066.4-2004, the definition 3.15]

Note 1. in °C units.

Note 2. Unless otherwise specified, temperature uniformity is generally expressed as follows. at each predetermined temperature measurement points measured temperature true value minus the set temperature (ie, the control point

The measured temperature) obtained the maximum difference (positive or negative). When not specified, an empty furnace state.

3.2 Furnace temperature stability

The stability of box furnace temperature point temperature in a thermally stable state when the test temperature.

[GB/T 10066.4-2004, the definition 3.16]

Note. in °C units.

3.3 Surface temperature

Box furnace at a thermally stable state at the highest temperature, the outer surface of the furnace at any point in the specified range of temperature and ambient temperature difference.

[GB/T 10066.4-2004, the definition 3.17]

Note. in °C units.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28849-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28849-2012

$255.00