GB/T 28813-2012Operating code for ±800kV DC overhead transmission line (English PDF)
±800kV直流架空输电线路运行规程
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28813-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 5, 2012
Implementation date
February 1, 2013
Scope
GB/T 28813-2012 is the English-translated version of ±800kV直流架空输电线路运行规程.
GB/T 28813-2012 is the Chinese standard "Operating code for ±800kV DC overhead transmission line".
Its scope clause reads: This standard specifies the ± 800kV UHV DC transmission lines, basic requirements for grounding pole line and run work site, technical Standards and inspection line inspection, testing, on-line monitoring, defect management, maintenance and operating standards, technology management put forward specific requirements.
This standard applies to ± 800kV UHV DC transmission lines, grounding lines and pole access. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28813-2012
National Standard of the People's Republic of China
- ICS
- 29.240.20
- Classification
- F 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 5 pre-construction and construction phase requires
- 6 operational requirements
- 7 Operation Management
- 9 line corridor protected area management
- 10 Technology Management
- Appendix A (informative) line wire-to-ground distance and cross-cutting
- Annex B (informative) under various conditions of minimum air gap
- Annex C (normative) line rating management approach
1 Scope
This standard specifies the ± 800kV UHV DC transmission lines, basic requirements for grounding pole line and run work site, technical
Standards and inspection line inspection, testing, on-line monitoring, defect management, maintenance and operating standards, technology management put forward specific requirements.
This standard applies to ± 800kV UHV DC transmission lines, grounding lines and pole access.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2900.51 Electrotechnical terminology overhead lines
DL409 electrical safety regulations (power line section)
DL436 HVDC overhead transmission lines Technical Guidelines
DL437 HVDC grounding Technical Guidelines
DL558 industry producing electrical accident investigation procedures
DL/T626 deterioration of the disc-shaped suspension insulator testing procedures
DL/T741 overhead transmission lines running order
DL/T763 overhead lines Preformed fittings technical requirements
DL/T810 DC Rod Composite Insulator technical conditions
DL/T864 nominal voltage above 1000V ac overhead lines with Guidelines for the use of composite insulators
DL/T1069 overhead transmission line conductor and grounding Buxiu Guide
DL/T5092 110 ~ 500kV overhead transmission line design technical regulations
DL/T5235 ± 800kV and below DC overhead transmission line construction and acceptance of project
People's Republic of China Electricity Law
Electricity Facilities Protection Ordinance People's Republic of China
Rules for the Implementation of power facilities protection regulations People's Republic of China
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Line body defect deviantiteminelectricline
All member body composed of lines, accessories and spare parts, including the foundation, tower, on cables, OPGW cable, insulators, fittings, then
Land and other means defects occurring.
3.2 Facilities defect
Additional on line body line identification, warning signs and all kinds of equipment and technical monitoring (online monitoring equipment, anti-special purpose […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28813-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28813-2012
$375.00