GB/T 28692-2012Printing machinery - Hot glue thermobinder - General test method (English PDF)
印刷机械 热熔胶订设备 通用试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28692-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2012
Implementation date
January 1, 2013
Scope
GB/T 28692-2012 is the English-translated version of 印刷机械 热熔胶订设备 通用试验方法.
GB/T 28692-2012 is the Chinese standard "Printing machinery - Hot glue thermobinder - General test method". Its scope clause reads: This standard specifies the terms and definitions Test methods, test conditions and general performance hot melt equipment set.
This standard applies to hot melt adhesive book cover package machine, glue and other hot melt adhesive book binding machine interaction device (hereinafter referred to as bookbinder). Its clauses include terms and definitions; test conditions.
Found what you need?
Document preview — GB/T 28692-2012
National Standard of the People's Republic of China
- ICS
- 37.100.10
- Classification
- J 87
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.
- 4 Test conditions
- 4.1 signatures
1 Scope
This standard specifies the terms and definitions Test methods, test conditions and general performance hot melt equipment set.
This standard applies to hot melt adhesive book cover package machine, glue and other hot melt adhesive book binding machine interaction device (hereinafter referred to as bookbinder).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5226.1-2008 Electrical safety of machinery machinery - Electrical equipment - Part 1. General requirements
JB/T6531 printing machinery noise sound power level measurement method
JB/T9123-2010 printing machinery hot melt adhesive book cover package machine
CY/T40-2007 bookbinding hot melt adhesive with EVA requirements and test methods
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Hot Melt Equipment Order hotgluethermobinder
The hot melt adhesive sheets or signatures integrated book block and cover bonded together to form a book (including books, this book) equipment.
3.2 Bookbinder firmness perfectbindingfastness
So that a single page from a vertical pull back from the book required bonding interface.
4 Test conditions
4.1 signatures
Signatures shall comply with the following requirements.
--- Folded signatures with 52g/m2 letterpress paper;
--- Signatures should dress neatly and flat through the tying or the like;
--- Signatures should be no knuckle, wrinkled, damaged pages;
--- Triple or more than triple the signatures, should be designated port to exclude air.
Cover 4.2
Cover use 120g/m2 ~ 250g/m2 offset paper. Cover each batch of consistent size, distance from the center of the back of the book cover to locate the edge
Consistent.
4.3 Hot Melt
Technical specifications and requirements 4.3.1 EVA rubber 4.1.1 should be consistent with the requirements in CY/T40-2007, see Appendix A in Table A.1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28692-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28692-2012
$195.00