Valid

GB/T 28512-2012Diameter base protocol for IP network (English PDF)

用于IP网络的Diameter基础协议

Preview PDF

This is a limited preview

Buy now to download the full PDF (79 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28512-2012 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

October 1, 2012

Scope

GB/T 28512-2012 is the English-translated version of 用于IP网络的Diameter基础协议.

GB/T 28512-2012 — This standard specifies the Diameter protocol architecture, the basic functions of Diameter, Diameter base protocol communication mode, Diameter base protocol signaling aspects of process and security requirements.

This standard applies to IP network AAA (authentication, authorization and accounting) systems and related equipment AAA.

Found what you need?

Document preview — GB/T 28512-2012

National Standard of the People's Republic of China

ICS
33.040.40
Classification
M 32

Issued by: Standardization Administration of China

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, abbreviations
  • 3.1 Terms and definitions
  • 3.2 Acronyms
  • Architecture 4 Diameter of
  • 4.1 Diameter and overall framework agreement outlines
  • Function 4.2 Diameter base protocol Overview
  • 4.3 Diameter concepts Interpretation
  • 4.4 Diameter Transfer Protocol
  • 4.5 Diameter encrypted message
  • 4.6 Diameter 12 compliant applications
  • 4.7 Diameter routing authorization
  • 5 Diameter protocol format
  • 5.1 DiameterHeader
  • 5.2 DiameterAVP
  • 6 Diameter peer communication mode
  • 6.1 Connection established
  • 6.2 Pairs of peer discovery mechanism
  • 6.3 Capability exchange
  • 6.4 Pairs peer connection Demolition
  • 6.5 Transmission error detection
  • 6.6 Pairs of peer state machine
  • 7 Diameter protocol process
  • 7.1 Diameter message processing
  • 7.2 Diameter error handling
  • 7.3 Diameter user session
  • 8 Diameter accounting
  • 8.1 Server is pointing to model
  • 8.2 Protocol message
  • 8.3 Pairs of extended application standard documentation requirements
  • 62 8.4 Error Recovery
  • 8.5 Billing records

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This revised standard adopts IETFRFC3588.2003 "Diameter base protocol." The main difference between this standard as follows.

--- According to Chinese customs for some formatting modified; some of the statements apply to international standards to apply to our standard Quasi-expression;

--- According to GB/T 1 series of requirements, an increase in Chapter 1, Chapter 2 and Chapter 3, in which 3.1 terms and definitions are from IETFRFC3588 1.3;

--- The standard 4.3.1,4.3.2,4.3.3,4.3.4,4.3.5,4.5 and 4.6, respectively, equivalent to 2.4 IETFRFC3588, 2.5,2.8,2.6,2.7,2.2 and 2.3;

--- The standard 4.4 From the technical content of 2.1 IETFRFC3588 maintain consistency;

--- The standard 5.1 and 5.2, respectively, equivalent to IETFRFC3588 of Chapters 3 and 4;

--- Chapter 6 of this standard is equivalent to IETFRFC3588 Chapter 5;

--- The standard of 7.1, 7.2 and 7.3, respectively, equivalent to IETFRFC3588 Chapter 6, Chapter 7, Chapter 8;

--- The standard of Chapters 8 and 9, respectively, equivalent to IETFRFC3588 Chapter 9 and Chapter 13;

--- The standard of Appendices B and C, respectively, equivalent to IETFRFC3588 of Chapter 10 and Chapter 12;

--- The standard Appendix D, Appendix E and F, respectively, equivalent to IETFRFC3588 of AppendixA, AppendixB, AppendixC;

--- 4.1,4.2,4.7 this standard, Appendix A, according to China's actual situation of their own to write.

The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

The standard by the China Communications Standards Association.

This standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute.

1 Scope

This standard specifies the Diameter protocol architecture, the basic functions of Diameter, Diameter base protocol communication mode, Diameter base protocol signaling aspects of process and security requirements.

This standard applies to IP network AAA (authentication, authorization and accounting) systems and related equipment AAA.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

IETFRFC2030 Simple Network Time Protocol (SNTP) Version 4 (SimpleNetworkTimeProtocol (SNTP) Version4) IETFRFC2234 extended BNF syntax specification. ABNF (AugmentedBNFforSyntaxSpecifications. ABNF) IETFRFC2246 Transport Layer Security (TLS) protocol version 1 (TheTLSProtocolVersion1.0) IETFRFC2279 UTF-8, ISO 10646 transformation formats (UTF-8, atransformationformatofISO 10646) IETFRFC2284bis PPP Extensible Authentication Protocol (EAP) (PPPExtensibleAuthenticationProtocol (EAP)) IETFRFC2407 for ISAKMP IPSec domain of translation (IPSecDOI) (TheInternetIPSecurityDomain ofInterpretationforISAKMP) IETFRFC2409 Internet Key Exchange (IKE) (TheInternetKeyExchange (IKE)) IETFRFC2474 IPv4 IPv6 header Differentiated Services Field (DS Field) and the definition (Definitionofthe DifferentiatedServicesField (DSField) intheIPv4andIPv6Headers) IETFRFC2486 Network Access Identifier (TheNetworkAccessIdentifier) IETFRFC2865 remote authentication dial-user service (RADIUS) (RemoteAuthenticationDialInUser Service (RADIUS)) IETFRFC2915 naming authority point DNS resource records (TheNamingAuthorityPointer (NAPTR) DNS ResourceRecord) IETFRFC2960 Stream Control Transmission Protocol (StreamControlTransmissionProtocol) IETFRFC3539 authentication, authorization, and accounting (AAA) - Transport Profile (Authentication, Authorizationand Accounting (AAA) TransportProfile) IEEE754-1985 binary floating-point arithmetic (BinaryFloating-PointArithmetic) ISO/IEC IS10646-1 Information technology - Universal Multiple-octet (Multiple-Octet) coded character set (Information Technology-UniversalMultiple-OctetCodedCharacterSet)

3 Terms and definitions, abbreviations

3.1 Terms and Definitions

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 79 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 10646

How to Download GB/T 28512-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
79 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28512-2012

$1,175.00