GB/T 28473.1-2012Temperature transmitters for use in industrial-process measure and control systems - Part 1: General specification (English PDF)
工业过程测量和控制系统用温度变送器 第1部分：通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28473.1-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
November 1, 2012
Scope
GB/T 28473.1-2012 is the English-translated version of 工业过程测量和控制系统用温度变送器 第1部分：通用技术条件.
GB/T 28473.1-2012 is the Chinese standard "Temperature transmitters for use in industrial-process measure and control systems - Part 1: General specification".
Its scope clause reads: This section GB/T 28473 requirements of industrial process measurement and control systems temperature transmitter common terminology and definitions, classification, Requirements, marking, packaging, storage and transport.
This section applies to industrial process measurement and control systems using thermocouples or RTD signal is converted to standard current and/or voltage Transmitter (hereinafter referred to as the transmitter).
The transmitter under special working conditions shall also meet the relevant standards. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28473.1-2012
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Thermocouple temperature transmitter
- 3.2 RTD temperature transmitter
1 Scope
This section GB/T 28473 requirements of industrial process measurement and control systems temperature transmitter common terminology and definitions, classification,
Requirements, marking, packaging, storage and transport.
This section applies to industrial process measurement and control systems using thermocouples or RTD signal is converted to standard current and/or voltage
Transmitter (hereinafter referred to as the transmitter).
The transmitter under special working conditions shall also meet the relevant standards.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment (GB 3836.1-2010, IEC 60079-0.2007,
MOD)
GB 3836.2 explosive atmospheres - Part 2. the flameproof enclosure "d" protection equipment (GB 3836.2-2010, IEC 60079-1.
2007, MOD)
GB 3836.4 explosive atmospheres - Part 4. the intrinsically safe "i" protection equipment (GB 3836.4-2010, IEC 60079-11.
2006, MOD)
GB 4208-2008 enclosure protection (IP rating) (IEC 60529.2001, IDT)
GB/T 9969-2008 industrial products General Instructions
GB/T 13384-2008 mechanical and electrical products packaging General technical conditions
GB/T 17212-1998 industrial process measurement and control - Terms and definitions (idtIEC 902. 1987)
GB/T 17614.1-2008 industrial process control systems Transmitters - Part 1. Methods of evaluating performance (IEC 60770-1.
1999, IDT)
GB/T 28473.2-2012 industrial process measurement and control temperature transmitters - Part 2. Methods for performance evaluation
3 Terms and Definitions
GB/T 17212-1998 and GB/T 17614.1-2008 established as well as the following terms and definitions apply GB/T 28473 of
This section.
3.1 Thermocouple temperature transmitter
Thermocouple temperature detection output is linear (ie, linear features), said transmitter thermocouple temperature transmitter.
3.2 RTD temperature transmitter
Output and thermal resistance temperature detector is linear (ie, linear features) transmitters, said RTD temperature transmitter.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 28473.1-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 28473.2-2012 — Temperature transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 28473.1-2012
$165.00