Valid

GB/T 28472.2-2012Distributor for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance (English PDF)

工业过程测量和控制系统用配电器 第2部分:性能评定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28472.2-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

November 1, 2012

Scope

GB/T 28472.2-2012 is the English-translated version of 工业过程测量和控制系统用配电器 第2部分:性能评定方法.

GB/T 28472.2-2012 is the Chinese standard "Distributor for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance".

Its scope clause reads: This section GB/T 28472 requirements for industrial process measurement and control systems with electrical performance evaluation methods and inspection rules.

This section applies to industrial process measurement and control systems distributor.

Found what you need?

Document preview — GB/T 28472.2-2012

National Standard of the People's Republic of China

ICS
25.040.40
Classification
N 15

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references

1 Scope

This section GB/T 28472 requirements for industrial process measurement and control systems with electrical performance evaluation methods and inspection rules.

This section applies to industrial process measurement and control systems distributor.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-

1.2007, IDT)

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-

2.2007, IDT)

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT)

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db alternating hot and humid (12h 12h cycle) (IEC 60068-2-30.2005, IDT)

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)

GB 4208-2008 housing protection (IP rating) (IEC 60529.2001, IDT)

GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment (IEC 61010-1.2001, IDT)

Method Listing combustion experiment GB/T 11020-2005 solid non-metallic materials when exposed to an ignition source (IEC 60707.1999,

IDT)

GB/T 16842-2008 protective shell for inspection and test equipment used with (IEC 61032.1997, IDT)

GB/T 17212-1998 industrial process measurement and control - Terms and definitions (idt IEC 60902. 1987)

GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001,

IDT)

GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-3.

2002, IDT)

GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (IEC 61000-

4-4.2004, IDT)

GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test (IEC 61000-4-5.

2004, IDT)

GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8.2001,

IDT)

GB/T 18271.1-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1. General (Idt IEC 61298.1995) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28472.2-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28472.2-2012

$225.00