Valid

GB/T 28469.1-2012Electromagnetic and inductive digital instrument - Part 1: General specification (English PDF)

电磁感应式数字化仪 第1部分:通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28469.1-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

November 1, 2012

Scope

GB/T 28469.1-2012 is the English-translated version of 电磁感应式数字化仪 第1部分:通用技术条件.

GB/T 28469.1-2012 is the Chinese standard "Electromagnetic and inductive digital instrument - Part 1: General specification". Its scope clause reads: This standard specifies the electromagnetic induction digitizer (hereinafter referred to as the digitizer) the technical requirements of their packaging, and transportation requirements.

Found what you need?

Document preview — GB/T 28469.1-2012

National Standard of the People's Republic of China

ICS
25.040.40
Classification
N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Requirements
  • 5 Marking, instructions for use, packaging and storage

3 Terms and definitions

4 Requirements

5 Marking, instructions for use, packaging and storage

Foreword

This document was issued on 29 June 2012 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 November 2012.

It is the first edition of this standard.

The document is under the responsibility of the China Machinery Industry Federation.

Classification: ICS 25.040.40, CCS N 10.

About this edition

GB/T 28469.1-2012 is the first edition of this standard. It was issued on 29 June 2012 and has been in force since 1 November 2012.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite GB/T 28469.1-2012 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Edition history and citation

GB/T 28469.1-2012 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite GB/T 28469.1-2012 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

GB/T 28469.1-2012 is classified under ICS 25.040.40, in the field of manufacturing engineering. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS N 10. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

The document is under the responsibility of the China Machinery Industry Federation, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is GB/T 28469.1-2012. A citation should carry the number with its year, because the year identifies the text that applies.

In a catalogue or a filing system it is found under ICS 25.040.40 and CCS N 10 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28469.1-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28469.1-2012

$145.00