GB/T 28412-2012General specification of superalloy investment cast airfoils (English PDF)
高温合金精铸叶片通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28412-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 29, 2012
Implementation date
March 1, 2013
Scope
GB/T 28412-2012 is the English-translated version of 高温合金精铸叶片通用技术条件.
GB/T 28412-2012 is the Chinese standard "General specification of superalloy investment cast airfoils". Its scope clause reads: standard specifies the technical requirements for high-temperature alloy casting blade product delivery, testing methods, inspection rules and technical delivery conditions content.
This standard applies to ordinary precision casting, casting directionally solidified, single crystal casting process to produce aircraft engines, ships and ground fuel Gas turbines and other work by casting a turbine blade, casting the turbine guide vanes.
Other types of blades can refer to the use of the casting. When the contract agreement or special technical documents and regulations inconsistent with the provisions of this standard should be based on contractual agreements or special technical documents Prevail. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 28412-2012
National Standard of the People's Republic of China
- ICS
- 77.140.99
- Classification
- H 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Turbine blades
1 Scope
1.1
standard specifies the technical requirements for high-temperature alloy casting blade product delivery, testing methods, inspection rules and technical delivery conditions content.
1.2
This standard applies to ordinary precision casting, casting directionally solidified, single crystal casting process to produce aircraft engines, ships and ground fuel
Gas turbines and other work by casting a turbine blade, casting the turbine guide vanes. Other types of blades can refer to the use of the casting.
1.3
When the contract agreement or special technical documents and regulations inconsistent with the provisions of this standard should be based on contractual agreements or special technical documents
Prevail.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 223 (all parts), steel and alloy chemical analysis method
RT Test Method. Test Part 1 GB/T 228.1 metal material tensile
Creep and endurance test methods GB/T 2039 metal extension
GB/T 4338 high-temperature metallic materials - Tensile testing
GB/T 14992 between high temperature alloys and high-temperature materials intermetallic compound of Classification and designation
GB/T 20066 Determination of the chemical composition of iron and steel sampling and preparation of samples by
Determination of GB/T 20127 (all parts) and alloy steel trace elements
GB/T 14999.7 superalloy castings grain size, dendrite arm spacing and a loose microscopic measurement method
GB/T 25932 superalloy master alloy General technical conditions
GJB509 heat treatment process quality control standards
GJB905 investment casting process quality control
YB/T081 metallurgical technology standard rounding off the detected value determination principles
HB6103 casting dimensional tolerances
HB6573 Steel Investment Castings standard reference radiographs
Determination of the crystal orientation of single crystal blades HB6742 X-ray back reflection Laue's photographic method
HB/Z60 X-ray radiographic testing
HB/Z61 penetrant inspection
HB/Z131-1988 superalloy selection of raw materials and technical conditions
3 Terms and Definitions
GB/T 14992, GB/T 14999.7 and GB/T 25932 defined and the following terms and definitions apply to this document.
3.1 Turbine blades
Gas turbine for directing the gas flow in a certain direction, or drive a turbine rotor rotating leaf parts called turbine blades.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28412-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 28412-2012
$195.00