Valid

GB/T 28273-2012Process classification of tube and sheet hydroforming (English PDF)

管、板液压成形工艺分类

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28273-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 11, 2012

Implementation date

December 1, 2012

Scope

GB/T 28273-2012 is the English-translated version of 管、板液压成形工艺分类.

GB/T 28273-2012 is the Chinese standard "Process classification of tube and sheet hydroforming". Its scope clause reads: This standard specifies the pipe, sheet metal hydroforming process and classification.

This standard applies to hydroforming process, the active sheet hydroforming process, passive sheet hydroforming process, plywood inside Pressure on inflation molding process.

This standard applies to the flexible body of liquid, viscous and other media as forming a molding method. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28273-2012

National Standard of the People's Republic of China

ICS
25.020
Classification
J 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Hydroforming
  • 3.2 Sheet hydroforming
  • 3.3 Hydro-punching hydraulic punching
  • 3.4 Liquid chamber diecavity
  • 3.5 Priming pre-filing
  • 3.6 Seal Tuitou sealingpunch, pushrod

1 Scope

This standard specifies the pipe, sheet metal hydroforming process and classification.

This standard applies to hydroforming process, the active sheet hydroforming process, passive sheet hydroforming process, plywood inside

Pressure on inflation molding process.

This standard applies to the flexible body of liquid, viscous and other media as forming a molding method.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 710 high-quality carbon structural steel sheets and strips

GB/T 716 carbon structural steel cold-rolled steel

GB/T 2521 cold rolled grain oriented and non-oriented electrical steel (sheet)

GB/T 17395 seamless steel pipe size, shape, weight and tolerance

GB/T 20887 (all parts), automotive high-strength steel sheet and strip hot

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Hydroforming

By internal pressure, axial afterburner feeding, the tube is pressed into the mold cavity so that the process of forming.

3.2 Sheet hydroforming

Using liquid water, oil and the like as a power transmission medium instead of a rigid punch or die, the blank attached to the sheet material under the pressure force-transmitting medium

Co-bumping or die and mold forming.

3.3 Hydro-punching hydraulic punching

In the role of fluid pressure within the tube supporting the use of punch or liquid pressure method wall material separation.

3.4 Liquid chamber diecavity

For receiving the working medium, the working parts forming a closed pressure chamber.

3.5 Priming pre-filing

The room was quickly filled with process working medium.

3.6 Seal Tuitou sealingpunch, pushrod

Used for sealing tube hydroforming, axial thrust transfer working parts.

END: Draft Version (GB/T 28273-2012)

GB/T 33201-2016 | GB/T 33084-2016 | GB/T 33083-2016 | GB/T 45981.1-2025 | GB/T 32151.51-2025 | GB/T 13320-2025 |

Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28273-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28273-2012

$255.00