Valid

GB/T 28174.4-2011Unified modeling language(UML) - Part 4: Diagram interchange (English PDF)

统一建模语言(UML) 第4部分：图交换

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28174.4-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2011

Implementation date

June 1, 2012

Scope

GB/T 28174.4-2011 is the English-translated version of 统一建模语言(UML) 第4部分：图交换.

GB/T 28174.4-2011 is the Chinese standard "Unified modeling language(UML) - Part 4: Diagram interchange". Its scope clause reads: This section GB/T 28174 specifies the visual detailing, constructing, and documenting the unified modeling language used for all kinds of software systems Statement.

The language can also be used to model other areas. This section applies to smooth between different software tools and seamlessly exchange documents. These tools can be UML modeling tool, on behalf of the Code generator, word processing tools and desktop publishing tools.

This section can also be used to exchange UML models and representations from the media on the Internet Normative role. FIG exchange without the optional compatible point, and switching means that is compatible with its abstract syntax, well-structured rules, semantic, symbolic, and XMI compatible.

Assign diagram elements in Appendix A. Its clauses include additional information.

Found what you need?

Document preview — GB/T 28174.4-2011

National Standard of the People's Republic of China

ICS: 35.080
Classification: L 77

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Additional information
4 Architecture Overview
5 metamodel extension
6 shows a view of deriving
7 shows a packet meta information to SVG SVG
Appendix A (informative) The assignment of Figure 21 elements

1 Scope

This section GB/T 28174 specifies the visual detailing, constructing, and documenting the unified modeling language used for all kinds of software systems

Statement. The language can also be used to model other areas.

This section applies to smooth between different software tools and seamlessly exchange documents. These tools can be UML modeling tool, on behalf of the

Code generator, word processing tools and desktop publishing tools. This section can also be used to exchange UML models and representations from the media on the Internet

Normative role.

FIG exchange without the optional compatible point. And switching means that is compatible with its abstract syntax, well-structured rules, semantic, symbolic, and

XMI compatible. Assign diagram elements in Appendix A.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 28174.1 Unified Modeling Language (UML) - Part 1. Infrastructure

GB/T 28174.2 Unified Modeling Language (UML) - Part 2. Superstructure

3 Additional Information

3.1 The concept research statement

Metamodel has been mentioned in this section with a different set of graph implementation and testing. The concept presented is proved before.

Use example and provided in Appendix B Throughout this document, it is currently converting the corresponding XMI representation by hand and more

It is not automatic. However, for the DTD provided, this example is effective and makes use XSLT transformation to become SVG may.

3.2 The basic principle of design

UML is a modeling language emphasizes the graphical representation of object-oriented software systems. It is the Ministry throughout the software development process

Department, and a large variety of tools can be used in this process. There is a change great way to set up. a big difference between the tool

Design drawings, consistency, storage model checking model for version management or permanent storage for code generation, used to prepare a document, presentation or

By developing documentation, and many more applications.

These use a variety of tools and seamless joint without problems is very valuable and desirable. Thus, one model

It represents information (including so-exchange) mechanism is included in the initial standard. Nevertheless, the mechanism UML1.x only support arrangements

In the definition of the model elements. While this model of consistency check or generate code tool is necessary, but this information surface

The graphical tool is not enough. Thus the majority took advantage of a graphical tool to exclude information, including UML tool itself.

Considering this aspect, UML1.x model exchange mechanism becomes insufficient, and the OMG and found to meet the need to correct this defect.

OMG internal meta information used to transmit general implementation mechanism XMI. XMI is a use it to send its own internal very Senate

END: Draft Version (GB/T 28174.4-2011)

GB/T 39099-2020 | GB/T 25000.51-2016 | GB/T 28172-2011 | GB/T 28173-2011 | GB/T 28174.3-2011 | GB/T 28174.2-2011 |

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Similar standards

GB/T 43208.2-2025|GB/T 45803-2025|GB/T 45989-2025|GB/T 46012-2025|GB/T 46900-2025|GB/T 33136-2024

How to Download GB/T 28174.4-2011

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.