Valid

GB/T 28104-2011Detection and identification of Incisitermes minor (Hagen) (English PDF)

小楹白蚁检疫鉴定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28104-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2011

Implementation date

June 1, 2012

Scope

GB/T 28104-2011 is the English-translated version of 小楹白蚁检疫鉴定方法.

GB/T 28104-2011 is the Chinese standard "Detection and identification of Incisitermes minor (Hagen)". Its scope clause reads: This standard specifies the small Ying termites Incisitermesminor (Hagen) site quarantine, laboratory examination to identify the samples preserved method.

This standard applies to quarantine and identification of small Ying termites. Its clauses include terms and definitions; basic information; principle of the method.

Found what you need?

Document preview — GB/T 28104-2011

National Standard of the People's Republic of China

ICS
65.020.01
Classification
B 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Terms and definitions
  • 3 Basic Information
  • 4 principle of the method

1 Scope

This standard specifies the small Ying termites Incisitermesminor (Hagen) site quarantine, laboratory examination to identify the samples preserved method.

This standard applies to quarantine and identification of small Ying termites.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 After chin postmentum

The lower lip of the base area. In some chewing mouthparts, the chin and the chin by the Asian two parts.

2.2

After the narrow chin (chin after the minimum width, waist and chin after shrinking at wide) minimumwidthofpostmentum

Ventral flat head, chin after measuring waist on both edges of the contraction, the width at the narrowest.

2.3 Pronotum long

Pronotum horizontally, measure the back, between the leading and trailing edges of the central recess (recess with or without) the minimum linear distance.

2.4 Points to fly hole (nuptial flight hole)

Mature termite colony produce winged adults, drilled or ground surface from the inner surface of the wood for the nuptial flight lair dug channels (often called sub fly-eye).

2.5 Vent holes (holes, vents) ventilationpore

Generally it believed that the vent hole is used to adjust the aperture termite nest temperature and humidity.

2.6 Wing scales long lengthofforewingscale

A straight line from the base to the wing joints (ie, the maximum length of the wing scales) between the shoulder seam wing.

3 Basic Information

Chinese name. small Ying termites.

Scientific name. Incisitermesminor (Hagen).

Belong to Isoptera Isoptera, wood termites Branch Kalotermitidae, Ying termites belong Incisitermes.

Ying is a small wood-dwelling termites termite easy by wood, wood products, wood packaging is artificially carry over long distances.

Ying small termite additional information, see Appendix A.

4 principle of the method

Suspected small Ying termites by field and laboratory detected by the naked eye, a magnifying glass with a stereoscopic microscope, in the form of characteristic soldier

END: Draft Version (GB/T 28104-2011)

GB/T 43165-2023 | GB/T 40135-2021 | GB/T 19495.4-2018 | GB/T 28108-2025 | GB/T 28095-2011 | GB/T 28094-2011 |

Quality Assurance | How to buy PDFs? | FAQ Terms of Service | Contact Information | Privacy Policy | Refund Policy | Shipping Policy […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28104-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28104-2011

$195.00