GB/T 27941-2011Code of design and installation for multi-split air conditioning (heat pump) system (English PDF)
多联式空调(热泵)机组应用设计与安装要求
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27941-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
October 1, 2012
Scope
GB/T 27941-2011 is the English-translated version of 多联式空调(热泵)机组应用设计与安装要求.
GB/T 27941-2011 is the Chinese national standard covering code of design and installation for multi-split air conditioning (heat pump) system. It was issued on 30 December 2011 and has been in force since 1 October 2012, as a first edition.
The document is under the responsibility of the China Machinery Industry Federation. This page is published from the official record of the 2011 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 27941-2011
National Standard of the People's Republic of China
- ICS
- 27.200
- Classification
- J 73
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 General Requirements
- 3.2 Construction Survey
- 3.3 Construction Planning
- 4.2 Construction Traffic
- 4.3 Structure, Materials and Equipment Transportation
- 4.4 Configuration of distributed resources
- 4.5 Grid structure and layout design
- 5 Neutron Fluence Rate Measurement
- 5.2 Neutron Detector
- 5.3 Neutron Fluence Rate Measuring Instrument
- 5.4 Neutron Fluence Rate Level-Related Alarms, Controls, and Shutdowns
- 5.5 Calibration and testing of neutron fluence rate measuring instruments
- 6 Temperature measurement
- 6.2 Fuel assembly temperature measurement
- 6.3 Moderator Temperature Measurement
- 6.4 Coolant temperature measurement
- 6.5 Temperature Measurements Important to Reactor Safety
- 6.6 Temperature protection instrument
- 6.7 Monitoring program
- 6.8 Environmental monitoring program
- 6.9 Emergency environmental monitoring
- 7 Coolant Measurement
- 7.2 Coolant flow measurement
- 7.3 Coolant pressure measurement
- 7.4 Coolant level measurement
- 7.5 Coolant Leakage Measurement
- 7.6 Coolant Purity Measurement
- 7.7 Coolant radioactivity measurement
- 8 Protection system
- 8.1 Introduction
- 8.2 Input-output diagram
- 8.3 Comprehensive Assessment of Energy-saving Design
- 9 Instrument power source
- 9.2 Reliable power system
- 9.3 Trial Run of Wind Turbine Generator System
- 9.4 Testing of Transformer
1 Foreword
GB/T 27941-2011 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 30 December 2011 and has been in force since 1 October 2012.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 21 pages in English translation.
2 Scope Preview
GB/T 27941-2011 falls under ICS 27.200, in the field of energy and heat transfer engineering.
This catalogue holds 1,532 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 21 pages
4 Related standards
Other editions:
GB/T 27941-2026 (later edition)
Standards on related subjects:
GB/T 25861-2023 — Water-source high temperature heat pumps using the vapor compression cycle
GB/T 25127.1-2020 — Low ambient temperature air source heat pump (water chilling) packages—Part 1: Heat pump (water chilling) packages for industrial & commercial and similar application
GB/T 25127.2-2020 — Low ambient temperature air source heat pump (water chilling) packages - Part 2: Heat pump (water chilling) packages for household and similar application
GB/T 27942-2011 — Small capacity scroll compressor for automotive air condition
GB/T 27940-2011 — Single-stage positive displacement refrigerant compressors parallel unit for commercial refrigeration application
5 Classification and status
International classification (ICS): 27.200
Chinese Standard Classification (CCS): J 73
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 27941-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27941-2011
$375.00