GB/T 27891-2011Carbon steel press-fittings (English PDF)
碳钢卡压式管件
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27891-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
June 1, 2012
Scope
GB/T 27891-2011 is the English-translated version of 碳钢卡压式管件.
GB/T 27891-2011 is the Chinese standard "Carbon steel press-fittings".
Its scope clause reads: This standard specifies the compression type fittings (hereinafter referred to as the tube), the term thin-walled carbon steel pipe (hereinafter referred to as steel) connected with the classification Marks, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the design pressure is less than 1.6MPa, nominal size no larger than DN100 fire lines and medium temperature no greater than Heat 110 °C, the air and gas pipes and other steel pipe pieces of the design, manufacture and acceptance. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 27891-2011
National Standard of the People's Republic of China
- ICS
- 47.020.30
- Classification
- U 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and mark
- 4.2 Basic parameters
- 4.3 Structure and basic dimensions
- 4.4 Product labeling
- 5 requires
- 5.1 Materials
- 5.2 Appearance
- 5.4 Strength
- 5.5 13 tightness
- 5.6 burst pressure
- 5.7 connectivity
- 5.8 13 surface corrosion
- 5.9 Installation
- 6 Test methods
- 6.1 Materials
- 6.2 Appearance
- 6.4 Strength
- 6.5 14 tightness
- 6.6 burst pressure
- 6.7 connectivity
- 7 Inspection rules
- 7.1 Inspection classification
- 7.2 Type inspection
- 7.3 factory inspection
- 8 signs, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
- Appendix A (normative) pipe connecting pipe
- Appendix B (normative) O-ring fittings
- Annex C (informative) Installation of steel pipes and pipe fittings
1 Scope
This standard specifies the compression type fittings (hereinafter referred to as the tube), the term thin-walled carbon steel pipe (hereinafter referred to as steel) connected with the classification
Marks, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the design pressure is less than 1.6MPa, nominal size no larger than DN100 fire lines and medium temperature no greater than
Heat 110 °C, the air and gas pipes and other steel pipe pieces of the design, manufacture and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 528 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties
GB/T 531 pocket rubber hardness indentation hardness test methods
GB/T 700-2006 carbon structural steel
GB/T 1682-1994 Determination of vulcanized rubber low temperature brittleness Single Specimen
GB/T 1685 vulcanized rubber or thermoplastic rubber at room temperature and high temperature compression stress relaxation measurement
GB/T 1690 vulcanized rubber or thermoplastic rubber Test method for resistance to liquids
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance
GB/T 3091-2008 low pressure liquid delivery welded steel pipe
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test
GB/T 5720 O-shaped rubber seals - Test methods
GB/T 5721 rubber seal products logo, packaging, transportation and storage of general provisions
Part 1 GB/T 7306.1 55 ° sealing pipe thread. inner cylindrical thread and taper external thread
GB/T 7759 vulcanized rubber, thermoplastic rubber at room temperature, high and low temperature compression set determination
GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking static tensile test method
GB/T 10125-1997 Corrosion tests in artificial atmospheres - salt spray test
Determination of strength GB/T 12829 vulcanized rubber or thermoplastic rubber small sample (sample Delft) Tear
GB/T 13912-2002 Metallic coatings Steel parts hot-dip galvanized layer of technical requirements and test methods
GB/T 15256-1994 Determination of vulcanized rubber low temperature brittleness (multiple test piece method)
CB/Z343-2005 Marine Accessories HDG
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Compression connection pressjoint
Socket fittings to connect pipes with special seals, with a special tool clamping nozzle into the sky a connector sealing and securing action the way.
GB/T 589-2015 | GB/T 592-2015 | GB/T 47250-2026 | GB/T 47249-2026 | GB/T 27890-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27891-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27891-2011
$525.00