GB/T 27890-2011Marine cryogenic stainless steel socket welding fittings (English PDF)
船用超低温不锈钢承插焊接头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27890-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
May 1, 2012
Scope
GB/T 27890-2011 is the English-translated version of 船用超低温不锈钢承插焊接头.
GB/T 27890-2011 is the Chinese standard "Marine cryogenic stainless steel socket welding fittings". Its scope clause reads: This standard specifies the marine ultra-low temperature stainless steel forged socket welding head (referred to as the joint) of classification and labeling requirements, test methods, inspection Rules, signs and packaging.
This standard applies to the design pressure of not more than 21MPa, working temperature not lower than -163 °C marine stainless steel forged socket welding head Design, manufacture and acceptance.
Shore station stainless steel ultra-low temperature piping systems can also refer to the joint use. Its clauses include classification and marking.
Found what you need?
Document preview — GB/T 27890-2011
National Standard of the People's Republic of China
- ICS
- 47.020.30
- Classification
- U 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification and Marking
- 3.2 Basic parameters
1 Scope
This standard specifies the marine ultra-low temperature stainless steel forged socket welding head (referred to as the joint) of classification and labeling requirements, test methods, inspection
Rules, signs and packaging.
This standard applies to the design pressure of not more than 21MPa, working temperature not lower than -163 °C marine stainless steel forged socket welding head
Design, manufacture and acceptance. Shore station stainless steel ultra-low temperature piping systems can also refer to the joint use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 600 marine piping valves General technical requirements
GB/T 1184-1996 shape and position tolerances without individual tolerance value
GB/T 1220-2007 stainless steel rod
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance
GB/T 1958 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements
GB/T 12716-2002 60 ° sealing pipe thread
ANSI/ASTMA182/A182M-05a high temperature equipment forging or rolling steel and stainless steel pipe flanges, fittings, valves and attached
Predetermined member (Standardspecificationforforgedorroledaloyandstainlesssteelpipeflanges, forgedfit- tings, andvalvesandpartsforhigh_temperatureservice)
MSSSP-83-2006 socket weld pipe fittings and thread 3000 lbs (Class3000steelpipeunionssocket weldingandthreaded)
3 Classification and Marking
Type 3.1
Fittings divided into the following six kinds of types.
a) A type --- socket weld fittings with diameter;
b) B type socket welding --- Reducing joint;
c) C-type socket welding --- same diameter elbow;
d) D-type socket welding --- the same diameter as the tee;
e) E-type socket welding --- nipple;
f) F --- type socket weld fittings branch.
3.2 Basic parameters
The basic parameters of the joint shown in Table 1.
GB/T 589-2015 | GB/T 592-2015 | GB/T 47250-2026 | GB/T 47249-2026 | GB/T 27891-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27890-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27890-2011
$195.00