GB/T 27799-2011Fabric reinforce plastic cover panel of trucks (English PDF)
载货汽车用复合材料覆盖件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27799-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
August 1, 2012
Scope
GB/T 27799-2011 is the English-translated version of 载货汽车用复合材料覆盖件.
GB/T 27799-2011 is the Chinese standard "Fabric reinforce plastic cover panel of trucks".
Its scope clause reads: This standard specifies trucks (including trucks and tractor-trailer) Terminology and definitions for composite panels, classification and marking, the main To raw materials, requirements, test methods, inspection rules and signs, packaging, transportation, storage and other requirements.
This standard applies to glass fiber reinforced material, unsaturated polyester resin matrix, hand paste, spray, resin transfer molding (RTM), sheet molding compound (SMC) molding and other processing of the composite car panels. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 27799-2011
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Wind shield airdirector
- 3.2 Shroud winddeflector
1 Scope
This standard specifies trucks (including trucks and tractor-trailer) Terminology and definitions for composite panels, classification and marking, the main
To raw materials, requirements, test methods, inspection rules and signs, packaging, transportation, storage and other requirements.
This standard applies to glass fiber reinforced material, unsaturated polyester resin matrix, hand paste, spray, resin transfer molding (RTM), sheet molding compound (SMC) molding and other processing of the composite car panels.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the edition are not applicable to the present file. For undated references, the latest edition (including any amendments) applies to this document.
Plastic tensile properties GB/T 1447 fiber reinforced
Plastic bending performance test method GB/T 1449 fiber reinforced
Methods plastic simply supported beam impact toughness test GB/T 1451 fiber reinforced
Plastic water absorption test method GB/T 1462 fiber reinforced
Plastic density and relative density test method GB/T 1463 fiber reinforced
Determination of GB/T 1634.2 plastic deflection temperature under load - Part 2. Plastics, ebonite and long-fiber-reinforced composite materials
Plastic average linear expansion coefficient test method GB/T 2572 fiber reinforced
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test
Plastic Barcol hardness test GB/T 3854 enhancements
Thermosetting plastics chemical resistance performance test method GB/T 3857 glass fiber reinforced
GB/T 4780-2000 term auto body
GB/T 8237-2005 fiber reinforced plastic with a liquid unsaturated polyester resin
GB/T 15568-2008 Universal sheet molding compound (SMC)
GB/T 17470-2007 glass fiber chopped strand mat and continuous strand mat
GB/T 18369-2008 fiberglass roving
GB/T 18370-2001 fiberglass roving
3 Terms and Definitions
GB/T 4780-2000 and defined the following terms and definitions apply to this document.
3.1 Wind shield airdirector
Located in front of the car parts on both sides of the guide airflow around the radiator mask.
3.2 Shroud winddeflector
The top of the cab, in order to reduce drag member established.
GB/T 40388-2021 | GB/T 39491-2020 | GB/T 36264-2018 | GB/T 27797.4-2013 | GB/T 27797.11-2011 | GB/T 27797.10-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27799-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 27799-2011
$195.00