Valid

GB/T 27505-2011Pressure controller (English PDF)

压力控制器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 27505-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 31, 2011

Implementation date

January 1, 2012

Scope

GB/T 27505-2011 is the English-translated version of 压力控制器.

GB/T 27505-2011 is the Chinese standard "Pressure controller". Its scope clause reads: This standard specifies the terms, product classifications, technical requirements, test methods, inspection rules pressure controller, logos, packaging and storage.

This standard applies to the pressure-sensitive element is a diaphragm pressure diaphragm, bellows, spring tube and the piston, and the vacuum pressure in the vacuum control passive (Hereinafter referred to as the controller). Its clauses include terms.

Found what you need?

Document preview — GB/T 27505-2011

National Standard of the People's Republic of China

ICS
17.100
Classification
N 11

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms1
  • 4 Product Category2
  • 5 Technical requirements3
  • 6 Test methods6
  • 7 Inspection rules8
  • 8 signs, packaging and storage9
  • Appendix A (normative) time interval between the test sequence and project11

1 Scope

This standard specifies the terms, product classifications, technical requirements, test methods, inspection rules pressure controller, logos, packaging and storage.

This standard applies to the pressure-sensitive element is a diaphragm pressure diaphragm, bellows, spring tube and the piston, and the vacuum pressure in the vacuum control passive (Hereinafter referred to as the controller).

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 13384 mechanical and electrical products packaging General technical conditions

JB/T 8220-1999 industrial process control systems bit controller performance evaluation method

JB/T 9329 basic instrumentation transportation transport storage environmental conditions and test methods

3 Terms

The following terms and definitions apply to this standard.

3.1 Pressure controller

To control or alarm when the measured pressure reaches the set point, but the device does not indicate the measured pressure function.

3.2 Control voltage range

The controller can control the pressure range.

3.3 Setpoint (value) setpoint

I want to happen input pressure switch.

3.4 Switch value

The output signal of the controller changes the pressure value.

3.5 The switch value

When the input pressure rises, the controller output signal of the pressure changes when the value.

3.6 By switching value

When the input pressure drop, the pressure controller output signal changes when the value.

3.7 Reset value

With the rise in input pressure, the output signal of the controller changes (ie, the switch), and then enter the pressure drops, the controller signal

GB/T 20730.2-2019 | GB/T 15478-2015 | GB/T 19146-2010 | GB/T 48051-2026 | GB/T 30121-2026 | GB/T 27504-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 27505-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 27505-2011

$195.00