GB/T 27026-2019Conformity assessment - Example of a certification scheme for tangible products (English PDF)
合格评定 有形产品认证方案示例
This is a limited preview
Buy now to download the full PDF (44 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27026-2019 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
July 1, 2020
Scope
GB/T 27026-2019 is the English-translated version of 合格评定 有形产品认证方案示例.
GB/T 27026-2019 — This standard provides examples of tangible product certification schemes for certification scheme type 5 as described in ISO /IEC 17067. Note 1.
The examples provided in this standard are product certification schemes. Where applicable, this example can also be used as a basis for developing a service and process certification scheme (see ISO / Type 6) of the certification scheme given in IEC 17067.
Note 2. In this standard, the evaluation of elements of the management system involved in product certification activities cannot be used as certification of the management system.
Note 3. This standard is intended to provide useful information to interested parties applying ISO /IEC 17067 to product certification.
Found what you need?
Document preview — GB/T 27026-2019
National Standard of the People's Republic of China
- ICS
- 03.120.20
- Classification
- A 00
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 terms and definitions
- 4 General examples of certification schemes
- 4.1 Development and implementation
- 4.2 Overview
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method equivalent to ISO /IEC TR17026..2015 "Conformity Assessment Tangible Product Certification Scheme Example".
The Chinese documents that have a consistent correspondence with the international documents referenced normatively in this standard are as follows.
--- GB/T 27000-2006 Conformity Assessment Vocabulary and General Principles (ISO /IEC 17000..2004, IDT)
--- GB/T 27065-2015 Requirements for conformity assessment products, processes and service certification bodies (ISO /IEC 17065..2012,
IDT);
--- GB/T 27067-2017 Conformity Assessment Product Certification Basis and Product Certification Scheme Guide (ISO /IEC 17067..2013
IDT).
This standard was proposed and managed by the National Certification and Accreditation Standardization Technical Committee (SAC/TC261).
This standard was drafted. China Quality Certification Center, China National Accreditation Center for Conformity Assessment, China National Certification and Accreditation Administration
Committee, Certification and Accreditation Technology Research Center of State Administration of Market Supervision, China Certification and Accreditation Association, China National Defense Industry Association, Beijing Saixi
Certification Center, China Machine Productivity Promotion Center, China Building Materials Inspection and Certification Group, Rheinland Technology Guardianship (Shenzhen) Co., Ltd.
Xin, China National Institute of Electronic Standardization, Fangyuan Logo Certification Group, and China National Standards Accreditation (Beijing) Certification Co., Ltd.
Introduction
Product certification provides confidence that products, processes, and services meet regulatory requirements, and is becoming more and more widely used.
This standard gives an example of a tangible product certification scheme of certification scheme type 5 described in ISO /IEC 17067, which
Provide useful information to interested parties applying ISO /IEC 17067.
There are many different scheme types in the practical application of product certification. This standard does not in any way restrict program owners and other interested parties
Negotiate other measures or develop combinations to meet specific goals in different combinations.
Particular attention should be paid to the scope of activities and the extent of the application, as opposed to the consequences and possibilities of the product's failure to meet specific requirements.
should. Product-related characteristics such as market, product technology, and production methods need to be considered.
The stakeholders that have the most impact on the rules, procedures and management of the programme include.
--- scheme owner;
--- certification body;
--- the manufacturer of the certified product;
--- Certified product users and other certification-related entities.
Note. When a certification body formulates and implements its own scheme, the certification body is the scheme owner.
Other stakeholders include, but are not limited to.
---Regulatory Authority;
--- Designers, purchasers and users;
--- Conformity assessment agencies involved in the product certification process, such as testing laboratories and inspection agencies;
--- accredited bodies and peer review teams;
--- Scheme owners to promote mutual recognition of international certification schemes;
---consumer.
This standard does not use requirements (represented by "should") or recommendations (represented by "should"). This standard is only used as product solution type 5
Example.
Example of conformity assessment tangible product certification scheme
1 Scope
This standard provides examples of tangible product certification schemes for certification scheme type 5 as described in ISO /IEC 17067.
Note 1. The examples provided in this standard are product certification schemes. Where applicable, this example can also be used as a basis for developing a service and process certification scheme (see ISO /
Type 6) of the certification scheme given in IEC 17067.
Note 2. In this standard, the evaluation of elements of the management system involved in product certification activities cannot be used as certification of the management system.
Note 3. This standard is intended to provide useful information to interested parties applying ISO /IEC 17067 to product certification.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document.
ISO /IEC 17000..2004 Conformity Assessment Vocabulary and General Principles
generalprinciples)
ISO /IEC 17065..2012 Conformity Assessment Requirements for Conformity Assessment Products, Processes and Services (Conformityassessment-Re-
quirementsforbodiescertifyingproducts, processesandservices)
ISO /IEC 17067..2013 Conformity Assessment Product Certification Basis and Product Certification Scheme Guide (Conformityassessment-
Fundamentalsofproductcertificationandguidelinesforproductcertificationschemes)
3 terms and definitions
Terms and definitions defined in ISO /IEC 17000, ISO /IEC 17067, and ISO /IEC 17065 apply to this document.
4 General examples of certification schemes
4.1 Development and implementation
Chapter 6 of ISO /IEC 17067..2013 specifies the general requirements for the development and implementation of product certification schemes. This standard gives
An example of how to implement these general requirements in a specific product certification scheme type 5. This standard does not restrict program owners from developing and implementing their own
Program. The scheme owner may develop other product certification schemes as given in ISO /IEC 17067.
4.2 Overview
This product certification scheme example corresponds to product certification scheme type 5 in ISO /IEC 17067. This standard further proposes the following functions
Capabilities, activities and elements.
a) Selection (see 4.5), including.
1) specified requirements for products covered by the certification scheme (such as standards or other regulatory documents);
2) Elements of production process evaluation and management system audit;
3) The basis for determining activities and implementing activities (e.g., certification body meets ISO /IEC 17065 requirements, testing agency compliance
Meet the applicable requirements of ISO /IEC 17025, the inspection agency meets the applicable requirements of ISO /IEC 17020, and the management system audit
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 44 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 17000 · IEC 17065 · IEC 17067
How to Download GB/T 27026-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27026-2019
$355.00