GB/T 27002-2011Conformity assessment -- Confidentiality -- Principles and requirements (English PDF)
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27002-2011 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
March 1, 2012
Scope
GB/T 27002-2011 (Conformity assessment -- Confidentiality -- Principles and requirements) is available as an English-translated PDF.
GB/T 27002-2011 — This standard gives the principles and requirements of confidentiality and conformity assessment related. This standard applies to conformity assessment standards of the working group drafting the generic elements of "confidentiality" set forth in the standard preparation.
This standard is not used directly in a separate conformity assessment activities.
Found what you need?
Document preview — GB/T 27002-2011
National Standard of the People's Republic of China
- ICS
- 03.120.20
- Classification
- A 00
Issued by: Standardization Administration of China
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle of confidentiality
- 5 Confidentiality claim
- 5.1 General
- 5.2 General requirements
- 5.3 Resource Requirements
- Reference
Foreword
This standard and the following standards constitute the national standards for conformity assessment criteria common elements prepared to provide guidance.
--- GB/T 27001-2011 "Conformity assessment principles and requirements of fairness";
--- GB/T 27003-2011 "conformity assessment complaints and appeals principles and requirements";
--- GB/T 27004-2011 "Conformity assessment principles and information disclosure requirements";
--- GB/T 27005-2011 "conformity assessment management system using the principles and requirements." this standard was drafted in accordance with the rules of GB/T 1.1-2009 and GB/T 20000.2-2009 given.
This standard uses the translation method identical with ISO/PAS17002.2004 "Conformity assessment principles and requirements of confidentiality." Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 27000-2006 "Conformity assessment - Vocabulary and general principles" (ISO/IEC 17000:2004, IDT).
The standard ISO/PAS17002.2004 made the following changes.
--- Delete the "ISO/PAS Foreword", according to GB/T 1.1-2009 increase the preface of this standard;
--- For the introduction, according to GB/T 1.1-2009 do adapt their requirements changes.
This standard certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points.
This standard was drafted. Beijing Tianyi positive Certification Center, China Institute of Metrology, National Building Materials Quality Inspection Center, China Household Electrical Appliances Research Hospital, Gentile Certification Center, a new era of China Certification Center, China Environmental United Certification Center.
Introduction
In order to standardize the preparation of conformity assessment standards are common elements of national certification and accreditation Standardization Technical Committee (SAC/TC261) Organizational criteria writing group is equivalent to using the following criteria.
ISO/PAS17001.2005 "Conformity assessment principles and requirements of fairness." ISO/PAS17002.2004 "Conformity assessment principles and requirements of confidentiality." ISO/PAS17003.2004 "Conformity assessment principles and requirements of complaints and appeals" ISO/PAS17004.2005 "Conformity assessment principles and requirements of information disclosure." ISO/PAS17005.2008 "Conformity Assessment Management System using the principles and requirements" Have formulated the following national standards.
GB/T 27001-2011 "Conformity assessment principles and requirements of fairness." GB/T 27003-2011 "Conformity assessment principles and requirements of complaints and appeals" GB/T 27004-2011 "Conformity assessment principles and requirements of information disclosure." GB/T 27005-2011 "conformity assessment management system using the principles and requirements" this series of standards for conformity assessment criteria requiring common elements are specified in the sub mandatory, recommended and recommendations of the three layers Times, and in the following one or more titles statement.
a) General requirements;
b) structural requirements;
c) resource requirements;
d) process requirements;
e) management system requirements.
This standard specifies the main principles of conformity assessment standard "confidentiality" elements and basic requirements.
The standard Chapter 4 (Principles) proposed conformity assessment criteria to guide the working group drafting the provisions of "confidentiality requirements" in its master file to principle.
The standard Chapter 5 presents the preparation of standards conformity assessment requirements "Privacy" common elements.
Conformity assessment principles and requirements of confidentiality
1 Scope
This standard gives the principles and requirements of confidentiality and conformity assessment related.
This standard applies to conformity assessment standards of the working group drafting the generic elements of "confidentiality" set forth in the standard preparation.
This standard is not used directly in a separate conformity assessment activities.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO/IEC 17000 Conformity assessment - Vocabulary and general principles (Conformityassessment-Vocabularyandgeneral principles)
3 Terms and Definitions
Terms and definitions ISO/IEC 17000 apply to this document defined.
Note. The term "body" used in this standard refers to accreditation bodies ISO/IEC 17000 defined or conformity assessment bodies.
4 Principle of confidentiality
4.1 In order to obtain conformity assessment activities effectively required information, the Agency shall ensure the confidentiality of information provided will not be disclosed trust.
4.2 All organizations and individuals have the right to provide any of its proprietary information protection requirements.
4.3 conformity assessment activities, the balance of the management of the relevant information to meet the requirements of confidentiality and disclosure between the parties can improve Trust and recognition of the value of conformity assessment activities.
Note. For common elements "information disclosure" See GB/T 27004-2011.
5 Confidentiality requirements
5.1 General
Taking into account the specific conformity assessment requirements described in varying degrees, to specify the requirements of this chapter is divided into three levels.
a) Mandatory
Mandatory requirements are specific requirements for conformity assessment standard drafting working group should be set forth in the relevant factors, unless a more specific technique Language alternative, otherwise should not be modified. For example. the phrase "should be impartial conformity assessment activities" may "should be justly implemented by more specific phrases Management system certification activities "instead. When conformity assessment working group drafting the standard in dealing with common elements without these specific requirements, should be given Justification.
b) Recommended
Recommended requirements for conformity assessment criteria set forth in the working group drafting the relevant elements, want to require higher specification level when used. This these requirements can be amended.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
ISO/IEC 17000
How to Download GB/T 27002-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24293-2026 — Thermostatic faucet
GB/T 48132.9-2026 — Green mine construction specifications - Part 9: Cement limestone mine
GB/T 48132.7-2026 — Green mine construction specifications - Part 7: Gold mine
Secure payment via Stripe
Payments accepted
GB/T 27002-2011
$129.00