GB/T 26875.5-2026Remote monitoring system for urban fire protection - Part 5: Functional requirements for receiving software (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part

1.Structure and Drafting Rules of Standardization Documents". Drafting. This document is Part 5 of GB (/T) 26875 "Urban Fire Remote Monitoring Systems". GB (/T) 26875 has the following published... part.

1.General Technical Requirements;

2.Functional Requirements for Communication Service Software;

3.Alarm Transmission Network Communication Protocol;

4.Basic Data Items;

5.Software Functional Requirements;

6.Functional Requirements for Information Management Software;

7.Functional Requirements for Fire Protection Facility Maintenance and Management Software;

8.Monitoring Center External Data Exchange Protocol;

9.User Information Transmission Device;

10.Requirements for fire protection facility information collection devices and interfaces. This document replaces GB/T 26875.5-2011 "Urban Fire Remote Monitoring System Part

5.Functional Requirements for Acceptance Software", and is consistent with... Compared with GB/T 26875.5-2011, apart from structural adjustments and editorial changes, the main technical changes are as follows:

a) The scope has been changed (see Chapter 1, Chapter 1 of the.2011 edition);

1 Scope

This document specifies the functional requirements and conformity evaluation for the receiving software used at manual receiving agent seats on the application support platform in a remote monitoring system of urban fire protection.

This document applies to the design, development and testing of the receiving software (hereinafter referred to as the “software”) used at manual receiving agent seats on the application support platform in a remote monitoring system of urban fire protection (hereinafter referred to as the “system”).

2 Normative References

The following documents are essential for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.

GB/T 25000.51-2016 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Part 51: Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing

GB/T 26875.1 Remote monitoring system of urban fire protection — Part 1: General technical requirements

3 Terms and Definitions

The terms and definitions given in GB/T 26875.1 apply to this document.

4 Functional Requirements

4.1 After the software is started and run or after a login operation, it shall automatically enter the receiving working state.

4.2 The software shall have operation confirmation prompts for functions such as parameter configuration, shift handover, onduty/offduty state switching, and exiting.

4.3 The software interface shall be displayed in Chinese. It shall have display interfaces for text information, geographic information and video information, and shall display, but not be limited to, the following information:

a) Unreceived information;

b) Date and time information;

c) Software version information;

d) Receiving agent seat and receiving agent information;

e) Offduty or onduty status information of receiving agents;

f) Communication connection status information.

Among the above information, the content in a) shall not be covered.

4.4 When two or more agent seats are online simultaneously receiving information, the software shall have functions for the assignment management of unreceived information to agent seats, for taking over information, and for transferring and pushing information.

4.5 During information processing, there shall be an indication of the receiving process. For improper operations, there shall be an alarm prompt.

4.6 The display interfaces for text information, geographic information and video information shall have associated operation functions. When processing newly received information on the text information display interface, the geographic information display interface and the video information display interface shall automatically switch to the corresponding geographic location and video interface. When performing a positioning operation on the geographic information display interface, the relevant location information shall be able to be extracted into the text information display interface.

4.7 The software shall be able to record and query the offduty and onduty times of receiving agents, the shift handover times of receiving agents, and duty notes, and shall have a log viewing function. The operation log shall include, but not be limited to, the start and exit times of the software, the times and content of parameter configuration changes, the times and content of software error prompts, and the times and status information of communication connection status changes.

4.8 The software shall have a time synchronisation function. The time deviation after time synchronisation shall comply with the provisions of GB/T 26875.1.

4.9 The software shall be able to receive, display, process and query the fire facility operational status information of networked units.

4.10 The software shall be able to display and query the fire safety management information of networked units, and shall be able to monitor and process the dynamic management information of the fire safety management information of networked units.

5 Conformity Evaluation

Remote monitoring system of urban fire protection — Part 5: Functional requirements for receiving software