GB/T 26832-2011Non-destructive testing instruments - Specifications for the wire rope electromagnetic tester (English PDF)
无损检测仪器 钢丝绳电磁检测仪技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26832-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26832-2011 is the English-translated version of 无损检测仪器 钢丝绳电磁检测仪技术条件.
GB/T 26832-2011 is the Chinese standard "Non-destructive testing instruments - Specifications for the wire rope electromagnetic tester". Its scope clause reads: This standard specifies the electromagnetic detection equipment and technical conditions ferromagnetic wire rope.
This standard is applicable to the detection of local damage and loss of metallic cross-sectional area of \u200b\u200bthe various types of defects in ferromagnetic wire rope electromagnetic detection equipment. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26832-2011
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- N 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical Requirements
- 4.1 Environmental Requirements
- 4.2 Performance Requirements
- 4.3 Stability and environmental testing requirements
- 4.4 appearance quality and structure
- 5 Test Method
- 5.1 Test Environment Condition
- 5.2 The main test instrument
- 5.3 Comparative Sample
- 5.4 Performance Test
- 5.5 Environmental Test
- 5.6 appearance and structure inspection
- 6 3 Product Inspection
- 6.1 Type test
- 6.2 factory inspection
- 7 signs, packaging, transportation and storage
- 7.1 marks
- 7.2 Packaging
- 7.3 Transportation and storage
1 Scope
This standard specifies the electromagnetic detection equipment and technical conditions ferromagnetic wire rope.
This standard is applicable to the detection of local damage and loss of metallic cross-sectional area of the various types of defects in ferromagnetic wire rope electromagnetic detection equipment.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs
GB/T 6587.2-1986 electronic measuring instruments Temperature Test
GB/T 6587.3-1986 electronic measuring instruments humidity test
GB/T 6587.4-1986 electronic measuring instrument vibration test
GB/T 6587.5-1986 electronic measuring instruments impact test
GB/T 8706 wire rope terminology, designation and classification
GB 9969.1 Instructions General Industrial Products
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 20737 Non-destructive testing - General terms and definitions
GB/T 21837-2008 ferromagnetic wire rope electromagnetic detection method
JB/T 9329 Instrumentation transport, transportation, storage and basic environmental conditions and test methods
3 Terms and Definitions
GB/T 8706, GB/T 20737 and GB/T 21837 and established the following terms and definitions apply to this standard.
3.1 Local damage detection sensitivity LFtestingsensitivity
Detector can detect the smallest local damage.
3.2 Sectional area of the metal loss detection sensitivity LMAtestingsensitivity
Minimum metal detector can detect the loss of cross-sectional area.
3.3 Dual function detector
Detector can detect and display the cross sectional area of the metal loss (LMA) changes simultaneously detect and display local damage (LF), this detection
Instrument signal recording apparatus may be a computer, chart recorder or other matching equipment.
3.4 Single-function detector
Detector can not detect and display the metal loss varying cross-sectional area and the local damage, can detect and display the one that seized
Tester signal recording apparatus may be a computer, chart recorder or other matching equipment.
GB 22448-2025 | GB/T 36017-2018 | GB/T 36015-2018 | GB/T 26838-2024 | GB/T 26833-2011 | GB/T 26830-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26832-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26832-2011
$135.00