GB/T 26802.6-2011Industrial control computer system - General specificaton - Part 6: Regulation of acceptance (English PDF)
工业控制计算机系统 通用规范 第6部分：验收大纲
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26802.6-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26802.6-2011 is the English-translated version of 工业控制计算机系统 通用规范 第6部分：验收大纲.
GB/T 26802.6-2011 is the Chinese standard "Industrial control computer system - General specificaton - Part 6: Regulation of acceptance". Its scope clause reads: This section GB/T 26802 specifies the content and methods of industrial control computer system for identification of inspection and examination and testing.
This section applies to the identification of acceptance under normal operating conditions using industrial control computer system and examination and testing.
This section does not apply to a board or a stand-alone industrial control computer system function modules, peripherals, supporting instruments and apparatus acceptance. Its clauses include terms and definitions; identification of acceptance.
Found what you need?
Document preview — GB/T 26802.6-2011
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 1 Identification of acceptance
- 4.1 General
- 4.2 Identification of acceptance of the declaration and organization
- 4.3 Document Review
- 4.4 Acceptance Test
- 4.5 Identification Conclusion
- 5 examination and testing
- 5.1 General
- 5.2 examination and testing organizations
- 5.4 packing inventory
- 5.5 Visual inspection
- 5.6 run detected
- 5.7 Acceptance
1 Scope
This section GB/T 26802 specifies the content and methods of industrial control computer system for identification of inspection and examination and testing.
This section applies to the identification of acceptance under normal operating conditions using industrial control computer system and examination and testing.
This section does not apply to a board or a stand-alone industrial control computer system function modules, peripherals, supporting instruments and apparatus acceptance.
2 Normative references
The following documents contain provisions which, through reference GB/T 26802 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 15532 Computer Software Test Specification
GB/T 17212 industrial process measurement and control - Terms and definitions (GB/T 17212-1998, idt IEC 60902. 1987)
GB/T 18271.1-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1. General (idt
IEC 61298-1.1995)
GB/T 26802.1-2011 industrial control computer system - Part 1 Generic specification. General requirements
3 Terms and Definitions
GB/T 17212 and GB/T 26802.1-2011 and established the following terms and definitions apply GB/T 26802 in this section.
3.1 Identification of acceptance
The new research and development of industrial control computer system after the trial is completed by the evaluation committee or the higher authorities in the comprehensive review of the related art
Surgery on the basis of the document, functionality and performance of the system for testing and evaluation, in order to make identification of the conclusions of the process.
3.2 Examination and testing acceptanceforexamination
Has been through the identification and acceptance of industrial control computer system, a user on the basis of review of a random file on the integrity of the system by the function
Plant inspection requirements of inspection and testing program conducted laboratory or field operation assessment, whether to confirm the reception process.
3.3 Tests programoftesting
Provided by the research unit of industrial control computer detection system functionality and performance testing procedures. Testing procedures should have
Start calls and convenient, flexible, gives normal operation flag information, fault conditions can provide a clear display and printing knot
Fruit and so on.
4 identification of acceptance
4.1 General
The identification of acceptance in industrial control computer system after completion of the trial.
GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26802.2-2017 | GB/T 26802.4-2011 | GB/T 26802.3-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26802.6-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26802.5-2011 — Industrial control computer system - General specification - Part 5: Safety requirements for field
GB/T 26802.4-2011 — Industrial control computer system - General specification - Part 2: letter symbol
GB/T 26802.3-2011 — Industrial control computer system - General specification - Part 3: Graphical symbols for use on equipment
Secure payment via Stripe
Payments accepted
GB/T 26802.6-2011
$195.00