GB/T 26802.5-2011Industrial control computer system - General specification - Part 5: Safety requirements for field (English PDF)
工业控制计算机系统 通用规范 第5部分：场地安全要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26802.5-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 29, 2011
Implementation date
December 1, 2011
Scope
GB/T 26802.5-2011 is the English-translated version of 工业控制计算机系统 通用规范 第5部分：场地安全要求.
GB/T 26802.5-2011 is the Chinese standard "Industrial control computer system - General specification - Part 5: Safety requirements for field". Its scope clause reads: This section GB/T 26802 provisions of industrial control computer system installation site security requirements.
This section applies to a variety of industrial control computer system installation requirements. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26802.5-2011
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Security Level
- 4.1 Security Level 1 classification
- 4.2 Security Level 2 implementation
- 5 Site
- 5.1 Site Selection
- 5.2 site seismic standards
- 5.3 Site vibration
- 5.4 load space floor
- 6 Fire
- 6.1 Structure Fire
- 6.2 Fire alarm and fire-fighting measures
- 7 power supply system
- 8 Ventilation
- 10 anti-static
- 11 anti-electromagnetic interference
- 12 Anti-corrosion
- 13 Anti-noise
- 14 anti-rodent
- 15 Security Management
- 16 Lightning
- 17 transmission line security measures
1 Scope
This section GB/T 26802 provisions of industrial control computer system installation site security requirements.
This section applies to a variety of industrial control computer system installation requirements.
2 Normative references
The following documents contain provisions which, through reference GB/T 26802 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, we are encouraged to reach agreement under this section
All parties that proposed to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 156-2007 standard voltage (IEC 60038.2002, MOD)
GB/T 2887-2000 General specification for computer sites
GB 4717 fire alarm controller
GB 8702 electromagnetic radiation protection
GB 12348 Environmental Standard of noise at boundary of industrial enterprises
GB/T 17214.2-2005 working conditions in industrial process measurement and control devices - Part 2. Power (IEC 60654-2.
1979, IDT)
GB/T 17214.3-2000 working conditions in industrial process measurement and control equipment Part 3. Mechanical influences (IEC 60654-3.
1983, IDT)
GB/T 17214.4-2005 Part 4 industrial process measurement and control devices. the impact of corrosion and erosion (IEC 60654-4.
1987, IDT)
GB 22337 social life of environmental noise emission standards
GB 50016 architectural design code for fire protection
GB 50057 Lightning in design
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1 Industrial control computer system site
Mounted industrial computer system physical device options, including industrial control computer systems production site, electricity and other facilities in order to
And maintenance of the workplace and staff system.
3.2 Seismic standards
Measure seismic scale required to determine the importance of seismic intensity and by the use of functional building.
Security Level 4
4.1 level of security classification
Security level requirements are shown in Table 1.
GB/T 41251-2022 | GB/T 32828-2016 | DL/T 680-2015 | GB/T 26802.2-2017 | GB/T 26802.4-2011 | GB/T 26802.3-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26802.5-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26802.6-2011 — Industrial control computer system - General specificaton - Part 6: Regulation of acceptance
GB/T 26802.4-2011 — Industrial control computer system - General specification - Part 2: letter symbol
GB/T 26802.3-2011 — Industrial control computer system - General specification - Part 3: Graphical symbols for use on equipment
Secure payment via Stripe
Payments accepted
GB/T 26802.5-2011
$135.00