Valid

GB/T 26790.3-2015Industrial wireless networks WIA Specification - Part 3: WIA-PA protocol conformance test specification (English PDF)

工业无线网络WIA规范第3部分：WIA-PA协议一致性测试规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (441 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26790.3-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2015

Implementation date

July 1, 2016

Scope

GB/T 26790.3-2015 is the English-translated version of 工业无线网络WIA规范第3部分：WIA-PA协议一致性测试规范.

GB/T 26790.3-2015 is the Chinese standard "Industrial wireless networks WIA Specification - Part 3: WIA-PA protocol conformance test specification". Its scope clause reads: This section GB/T 26790 defines WIA-PA devices to join the process, running away from the process and network security test specification.

This section applies to industrial process based on WIA-PA measurement, monitoring and control of wireless network equipment. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 26790.3-2015

National Standard of the People's Republic of China

ICS: 25.040
Classification: N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 WIA-PA Conformance Test System structure
5.2 Test Procedure
5.3 Test Name Description
5.4 Test pseudo-code instructions
5.5 Reference data packet Symbol Description
6 field device test set (non-safety test section)
6.1 Test Suite 13 accession process
6.2 During operation 26 Test Set
6.3 leave the testing process set
7 routing equipment test set (non-safety test section)
7.1 Test Suite 71 accession process
7.3 leave the testing process set
8 gateway test set (non-safety test section)
8.2 leave the testing process set
9 field devices test set (safety test section)
9.1 Security accession process test set
9.2 Safety during the operation test set
9.3 safe to leave the testing process set
10 routing equipment test set (security section)
10.1 accession process safety test set
10.2 Safety during the operation test set
10.3 safe to leave the testing process set
11 gateway test set (security section)
11.1 Safety during the operation test set
11.2 leave the testing process set

1 Scope

This section GB/T 26790 defines WIA-PA devices to join the process, running away from the process and network security test specification.

This section applies to industrial process based on WIA-PA measurement, monitoring and control of wireless network equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 26790.1-2011 industrial wireless network specification - Part 1 WIA. WIA for process automation and system architecture

Communications Decency

Inter IEEESTD802.15.4-2011 IEEE Standard for Information Technology - Telecommunications and information exchange between systems - Local and metropolitan area networks

Specific requirements Part 15.4. low-rate wireless personal area network (LR-WPAN) Wireless MAC (MAC) and Physical Layer (PHY) specification [IEEE StandardforInformationtechnology-Telecommunicationsandinformation exchangebetweensystems-Localandmetropolitanareanetworks-Specificrequirements-Part 15.4.

WirelessMedium AccessControl (MAC) andPhysicalLayer (PHY) SpecificationsforLow-Rate

WirelessPersonalAreaNetworks (LR-WPANs)]

3 Terms and Definitions

GB/T 26790.1-2011 and as defined in the following terms and definitions apply to this document. For ease of use, repeat the following list

GB/T 26790.1-2011 some of the terminology and definitions.

3.1 Absolute slot number

From the network formation start counting all the time slots, usually it refers to the current value of the slot number.

Note. The value in increments of 1 count, usually the serial number of the current slot, and the maximum value of (248-1), after reaching the maximum value, the value is reset to 0.

[GB/T 26790.1-2011, the definition 3.1.1]

3.2 Initiative to leave activeleaving

After routing to the gateway device or leave the application process field device to the routing device after application to leave.

[GB/T 26790.1-2011, the definition 3.1.2]

3.3 Polymerization aggregation

Multiple user packet data application object or cluster members merged into the process of a package.

[GB/T 26790.1-2011, the definition 3.1.5]

GB/T 33009.2-2016 | GB/T 33009.1-2016 | GB/T 33008.1-2016 | GB/T 26790.4-2020 | GB/T 26790.2-2015 | GB/T 26796.2-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 441 pages — is available in the English PDF.

Similar standards

GB/T 32202.1-2026|GB/T 32202.2-2026|GB/T 42126.4-2026|GB/T 47234-2026|GB/T 47683-2026|GB/T 47696-2026

How to Download GB/T 26790.3-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.