GB/T 26735-2011Glass fiber reinforced thermosetting resin spray pipe (English PDF)
玻璃纤维增强热固性树脂喷淋管
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26735-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 20, 2011
Implementation date
March 1, 2012
Scope
GB/T 26735-2011 is the English-translated version of 玻璃纤维增强热固性树脂喷淋管.
GB/T 26735-2011 is the Chinese standard "Glass fiber reinforced thermosetting resin spray pipe".
Its scope clause reads: This standard specifies the terms and definitions of glass fiber reinforced thermosetting resin spray pipes (hereinafter referred to as sprinklers), raw materials, general rules Technical requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to the nominal diameter of DN40mm ~ DN1400mm, thermosetting resin as the base material, glass fiber and its system Used as a reinforcement material for power plants or other coal - fired systems Flue gas wet limestone desulphurization device Absorption tower in the slurry distribution of the spray pipe.
Ammonia Desulfurization spray pipe can also refer to the use. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 26735-2011
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 3.1 Spray pipe
- 3.2 Absorber
1 Scope
This standard specifies the terms and definitions of glass fiber reinforced thermosetting resin spray pipes (hereinafter referred to as sprinklers), raw materials, general rules
Technical requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to the nominal diameter of DN40mm ~ DN1400mm, thermosetting resin as the base material, glass fiber and its system
Used as a reinforcement material for power plants or other coal - fired systems Flue gas wet limestone desulphurization device Absorption tower in the slurry distribution of the spray pipe. Ammonia
Desulfurization spray pipe can also refer to the use.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Test method for tensile properties of fiber reinforced plastics GB/T 1447
Test method for compressive properties of fiber reinforced plastics GB/T 1448
Test method for flexural properties of fiber reinforced plastics GB/T 1449
Test method for mechanical properties of fiber - wound reinforced plastic ring specimens GB/T 1458
Paints and varnishes - Determination of abrasion resistance - Rotating rubber grinding wheel method GB/T 1768-2006
Test method for insoluble content of fiber reinforced plastic resins GB/T GB/T 2577 glass fiber reinforced plastic resin content test method
GB/T 3854 reinforced plastics Barker hardness test method
Test method for axial tensile properties of fiber reinforced thermosetting plastics pipes GB/T GB/T 8237 Liquid Unsaturated Polyester Resin for Fiber Reinforced Plastics
GB/T 17470 glass fiber chopped strand mat and continuous silk felt
GB/T 18369 Glass fiber roving
GB/T 18370 glass fiber twist roving
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Spray pipe
Flue gas wet limestone desulfurization device absorption tower, the circulating spray slurry evenly distributed to the nozzle of the pipeline.
3.2 Absorber
Through the spray slurry method, to remove flue gas sulfur dioxide and other harmful ingredients of the equipment.
GB/T 40388-2021 | GB/T 39491-2020 | GB/T 36264-2018 | GB/T 26745-2021 | GB/T 26744-2011 | GB/T 26743-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26735-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26735-2011
$255.00