GB/T 26595-2011Non-destructive testing instruments - Specification for panoramic X-ray tube (English PDF)
无损检测仪器 周向X射线管技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26595-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
November 1, 2011
Scope
GB/T 26595-2011 is the English-translated version of 无损检测仪器 周向X射线管技术条件.
GB/T 26595-2011 is the Chinese standard "Non-destructive testing instruments - Specification for panoramic X-ray tube".
Its scope clause reads: This standard specifies the characteristics of the peripheral structure of the X-ray tube, technical requirements, test methods, inspection rules and signs, packaging, transportation, storage Memory and so on.
This standard applies to the following tube voltage 500kV industrial flaw detection X-ray tube with a circumferential direction (hereinafter referred to as a circumferential tube). Its clauses include terms and definitions; technical requirements.
Found what you need?
Document preview — GB/T 26595-2011
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- N 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 5 Technical condition
- 6 Test Method
- 7 Inspection rules
- 8 signs, packaging, transportation and storage
1 Scope
This standard specifies the characteristics of the peripheral structure of the X-ray tube, technical requirements, test methods, inspection rules and signs, packaging, transportation, storage
Memory and so on.
This standard applies to the following tube voltage 500kV industrial flaw detection X-ray tube with a circumferential direction (hereinafter referred to as a circumferential tube).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2421-1999 Environmental testing for electric and electronic products - Part 1. General
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 26833-2011 industrial nondestructive testing equipment general technical conditions with X-ray tube
JB/T 9329 Instrumentation transport, transportation, storage and basic environmental conditions and test methods
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 Filament characteristics
Relationship between X-ray tube filament current and filament voltage.
3.2 Anode current stability
X-ray tube under specified operating conditions and within the stipulated time, the maximum amount of change in the anode current anode current ratio of its starting.
3.3 Maximum peak reverse voltage
Since the half-wave rectifier circuit, X-ray tube anode rated current, allowing the bear between the anode and cathode highest peak reverse
Voltage.
Four weeks of the structural characteristics of the tube
Housing material. glass, metal, ceramics;
Radiation method. circumferential (360 °).
5 Technical requirements
Normal working conditions 5.1 weeks of the tube a) Ambient temperature. -10 °C ~ 40 °C;
b) the relative humidity of the air is 85%;
GB 22448-2025 | GB/T 36017-2018 | GB/T 36015-2018 | GB/T 26594-2011 | GB/T 26593-2011 | GB/T 26592-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26595-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26595-2011
$165.00