GB/T 26593-2011Non-destructive testing instruments - Properties test method for performance of industrial X-ray computed tomography (CT) equipment (English PDF)
无损检测仪器 工业用X射线CT装置性能测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26593-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 16, 2011
Implementation date
November 1, 2011
Scope
GB/T 26593-2011 is the English-translated version of 无损检测仪器 工业用X射线CT装置性能测试方法.
GB/T 26593-2011 is the Chinese standard "Non-destructive testing instruments - Properties test method for performance of industrial X-ray computed tomography (CT) equipment".
Its scope clause reads: This standard specifies the terms of industrial X-ray CT apparatus (hereinafter referred to as CT apparatus) performance testing, definitions, abbreviations and space Resolution, density resolution, cursor positioning accuracy, layer thickness accuracy, CT value of the standard deviation test methods.
This standard applies to factory inspection and type inspection of industrial CT apparatus. Its clauses include definitions and acronyms.
Found what you need?
Document preview — GB/T 26593-2011
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- N 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Definitions and Abbreviations
- 4 Test Method
- 4.2 Test 3 density resolution
- 4.3 Position the cursor measurement accuracy
- 4.4 thickness measurement accuracy
- 4.5 CT value of the standard deviation measured
- Appendix A (normative) disc standard test piece
- Annex B (informative) algorithm flow test disc method
- Annex C (normative) hole card type test method to test the spatial resolution
- Annex D (normative) Test method air gap density resolution
1 Scope
This standard specifies the terms of industrial X-ray CT apparatus (hereinafter referred to as CT apparatus) performance testing, definitions, abbreviations and space
Resolution, density resolution, cursor positioning accuracy, layer thickness accuracy, CT value of the standard deviation test methods.
This standard applies to factory inspection and type inspection of industrial CT apparatus.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 12604.2 Terminology for nondestructive testing radiographic testing
3 Definitions and Acronyms
3.1 Terms and Definitions
GB/T 12604.2 and established the following terms and definitions apply to this standard.
3.1.1 Spatial resolution
Industrial CT apparatus to identify and distinguish high contrast fine detail features the highest capacity.
3.1.2 Density resolution
Industrial CT apparatus differentiate density contrast material characteristic change of the highest ability.
3.1.3 Artifact
And the structure and physical properties of the specimen-independent image features appearing in the CT image.
3.1.4 Standard test piece phantom
Industrial CT apparatus for determining the spatial resolution and density resolution and other performance indicators of the specimen.
3.1.5 Modulation Transfer Function
The relationship between the spatial frequency modulation with the image of the system. It is numerically equal to the line spread function of the one-dimensional Fourier transform.
3.1.6 Reconstruction
Ray projection data after passing through the specimen into a specimen representative of the attenuation characteristics of the distribution of cross-sectional images of the calculation process.
3.1.7 Pixel
CT images constitute a basic unit.
3.1.8 Slice thickness
The thickness ray CT image corresponding to the object is being cut.
GB 22448-2025 | GB/T 36017-2018 | GB/T 36015-2018 | GB/T 26595-2011 | GB/T 26594-2011 | GB/T 26592-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26593-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26593-2011
$255.00