GB/T 26502.1-2011Transmission belt rubber sheets cutting and splicing machine (English PDF)
传动带胶片裁断拼接机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26502.1-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2011
Implementation date
October 1, 2011
Scope
GB/T 26502.1-2011 is the English-translated version of 传动带胶片裁断拼接机.
GB/T 26502.1-2011 is the Chinese standard "Transmission belt rubber sheets cutting and splicing machine".
Its scope clause reads: This section GB/T 26502 specifies the belt film award terms and definitions, the basic parameters of the model and stitching machine, requirements, testing, Inspection rules, marking, packaging, transportation and storage.
This section applies to a variety of rubber transmission belt splicing film cutting machine (hereinafter referred to as stitching machine). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26502.1-2011
National Standard of the People's Republic of China
- ICS
- 83.200
- Classification
- G 95
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.2 Film splicing scrap rubbersplicescrap
1 Scope
This section GB/T 26502 specifies the belt film award terms and definitions, the basic parameters of the model and stitching machine, requirements, testing,
Inspection rules, marking, packaging, transportation and storage.
This section applies to a variety of rubber transmission belt splicing film cutting machine (hereinafter referred to as stitching machine).
2 Normative references
The following documents contain provisions which, through reference GB/T 26502 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB 2894 Safety Signs and use guidelines
GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT)
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements (IEC 60204-1.2005,
IDT)
GB/T 6388 transport package shipping mark
GB/T 7932 pneumatic systems General technical conditions (GB/T 7932 2003, ISO 4414.1998, IDT)
GB/T 8196 mechanical safety devices fixed and movable guards General requirements for the design and manufacture (GB/T 8196-2003, ISO 14120.2002, MOD)
GB/T 12783 Rubber & Plastics Machinery Model methodology
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
Determination of HG/T 2108 rubber machinery noise level of
HG/T 3120 Rubber & Plastics Machinery appearance of the general technical conditions
HG/T 3223 Rubber Machinery terminology
HG/T 3228 Rubber & Plastics Machinery paint general technical conditions
3 Terms and Definitions
HG/T 3223 and established the following terms and definitions apply to this section.
3.1
For short fiber film after cutting width set by doing 90 ° turn, and after the film spliced end to end, together with the mattress wound onto the mandrel device of.
3.2 Film splicing scrap rubbersplicescrap
When the butt splicing manner splicing film, was cut under the section called splicing film scrap.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26502.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26502.2-2011 — Transmission belt building machine
GB/T 26502.3-2011 — Poly-v belt grinding machine
GB/T 26502.4-2011 — Synchronous belt grinding machine
Secure payment via Stripe
Payments accepted
GB/T 26502.1-2011
$165.00