Valid

GB/T 26478-2011Globe valves for ammonia and lift check valves (English PDF)

氨用截止阀和升降式止回阀

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26478-2011 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 12, 2011

Implementation date

October 1, 2011

Scope

GB/T 26478-2011 is the English-translated version of 氨用截止阀和升降式止回阀.

GB/T 26478-2011 is the Chinese standard "Globe valves for ammonia and lift check valves". Its scope clause reads: This standard specifies the structure of ammonia in the form of cut-off valve and lift check valves, technical requirements, materials, test methods, inspection rules, marks, Painting, packaging and storage.

This standard applies to nominal pressure PN10 ~ PN40, nominal size no greater than DN300, suitable for a temperature of -46 °C ~ 150 °C, so With medium ammonia gas, ammonia, and ammonia, in the form of a threaded end connections, cut-off valve and lift check valves and welded flange connection (hereinafter referred to as Closing valves, check valves). Ammonia throttle may refer to this standard. Its clauses include structure.

Found what you need?

Document preview — GB/T 26478-2011

National Standard of the People's Republic of China

ICS
23.060.50
Classification
J 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 structure
  • 4 3 Technical requirements
  • 4.1 length of the structure
  • 4.2 connection terminal
  • 4.4 valve cover
  • 4.5 valve and seat
  • 4.6 Stem
  • 4.7 packing and stuffing box
  • 4.8 handwheel and Operation
  • 4.9 valve performance
  • 5 Material
  • 5.1 General requirements
  • 5.2 Body and bonnet
  • 5.3 valve
  • 5.4 Stem
  • 5.5 body and bonnet bolts
  • 5.6 body and bonnet connection pad
  • 5.7 filler
  • 5.8 handwheel
  • 6 Test methods
  • 6.1 Pressure Test
  • 6.2 Body wall thickness measurement
  • 6.4 Material Analysis
  • 6.5 Body material mechanical properties
  • 6.6 static life test
  • 6.7 8 valve check mark
  • 7 Inspection rules
  • 7.1 Test Project
  • 7.2 factory inspection
  • 7.3 Type inspection
  • 7.4 Sampling Method
  • 8 mark
  • 8.2 mark on the valve body
  • 8.3 mark on the nameplate
  • 9 painting, packaging and storage

1 Scope

This standard specifies the structure of ammonia in the form of cut-off valve and lift check valves, technical requirements, materials, test methods, inspection rules, marks,

Painting, packaging and storage.

This standard applies to nominal pressure PN10 ~ PN40, nominal size no greater than DN300, suitable for a temperature of -46 °C ~ 150 °C, so

With medium ammonia gas, ammonia, and ammonia, in the form of a threaded end connections, cut-off valve and lift check valves and welded flange connection (hereinafter referred to as

Closing valves, check valves).

Ammonia throttle may refer to this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 196 common thread basic size

GB/T 197 common thread tolerance

GB/T 228 metal materials at room temperature tensile test method

GB/T 1220 stainless steel rods

GB/T 5796 (all parts) trapezoidal thread

GB/T 9113 (all parts) Integral steel pipe flanges

GB/T 12220 Universal Valve logo

GB/T 12221 metal valve structure length

GB/T 12224 General requirements for steel valves

GB/T 12226 General Valve gray iron castings

GB/T 12227 General Valve iron castings

GB/T 12228 Universal valves carbon steel forgings

GB/T 12229 Universal valves carbon steel castings

GB/T 12233 iron globe valves and lift check valves

GB/T 12235 Petroleum, petrochemical and allied industries steel globe valves and lift check valves

GB/T 12459 steel welded seamless pipe fittings

HG/T 20592 steel pipe flanges (PN series)

JB/T 106 valves and painted signs

JB/T 5300 industrial valves material selection guidelines

JB/T 7248 valve cryogenic steel castings

JB/T 8859 cut-off valve static life test procedures

Inspection and testing JB/T 9092 valve

3 structure

In the form of typical structure 3.1 straight-off valve shown in Figure 1.

GB/T 24925-2019 | GB 26640-2011 | GB/T 24921.1-2010 | GB/T 26481-2022 | GB/T 26480-2011 | GB/T 26479-2011 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26478-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26478-2011

$225.00