GB/T 26340-2010Adjustable rehabilitation training bed (English PDF)
可调式康复训练床
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26340-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
May 1, 2011
Scope
GB/T 26340-2010 is the English-translated version of 可调式康复训练床.
GB/T 26340-2010 is the Chinese standard "Adjustable rehabilitation training bed". Its scope clause reads: This standard specifies the terms and definitions adjustable bed rehabilitation training, classification and models, security requirements, technical requirements, test methods, the use of Specification and labels.
Manual or electric This standard applies to rehabilitation rehabilitation training using adjustable rehabilitation beds, PT rehabilitation beds, straight Li rehabilitation beds, multi-position rehabilitation bed. Its clauses include terms, definitions and abbreviations.
Found what you need?
Document preview — GB/T 26340-2010
National Standard of the People's Republic of China
- Classification
- C 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 4 Classification and type
- 6 bed upright specific safety requirements
- 7 Electrical Technical Requirements
- 8 9 Test Method
- 9 inspection rules
- 10 Owner's Manual
- 11 Label
1 Scope
This standard specifies the terms and definitions adjustable bed rehabilitation training, classification and models, security requirements, technical requirements, test methods, the use of
Specification and labels.
Manual or electric This standard applies to rehabilitation rehabilitation training using adjustable rehabilitation beds, PT rehabilitation beds, straight
Li rehabilitation beds, multi-position rehabilitation bed.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. Cited documents dated, its subsequent repair
Change a single (not including errata content) or revisions do not apply to this standard, however, encourage the parties to study whether according to the agreement
You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3768 Determination of sound pressure of sound power levels of noise sources using an enveloping surface reflectance measuring surface Simple Method
GB 9706.1 Medical electrical equipment Part 1. General requirements for safety
GB/T 10357.6 single bed Furniture mechanical properties test strength and durability
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this standard.
3.1.1
There are one or more blocks deck, you can adjust the height and (or) angle, the bed surface assist users in rehabilitation training activities in bed, including
Specified by the manufacturer so that the device can be used normally required attachments.
3.1.2 PT rehabilitation beds
In the physical therapist assisted body exercise training using, you can adjust the height of the bed (see Figure 1).
3.1.3 Upright rehabilitation beds
The bed can be adjusted to the bed and perpendicular to the ground, the auxiliary support user performs standing training (see Figure 2).
3.1.4 Multi-position rehabilitation bed
There are more than two deck, the height can be adjusted independently of each bed, and (or) the angle of the auxiliary user performs a variety of positions bed training (see image 3).
3.1.5 Bed lifting frame bedlift
Adjusting Training in bed height or angle change bed training, training and support bed shelf.
3.1.6 Safe working load
Training does not cause personal injury or damage to the bed of the maximum permissible load, including users, bed, mattress and accessories, as well as other bed
Lifting frame member is lifted.
GB/T 16886.6-2022 | GB/T 16886.9-2022 | GB/T 19702-2021 | GB/T 22576.1-2026 | GB/T 16886.2-2026 | GB/T 26346-2010 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 26340-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 26340-2010
$285.00